LayItLow.com Lowrider Forums banner

SPI-Southern Polyurtherenes Clear

929 views 6 replies 6 participants last post by  Hoss805 
#1 ·
Anybody ever used this clear?? thinking about using this on my current job. I would appreication any feedback or thoughts. Thanks
 
#2 ·
I've used the "Universal" a lot and really like it.
It's a soft clear, you can buff it easily even months later.
Makes it good for chip resistance and flexible parts.
It's a 1 to 1 mix so a 1 gallon kit makes 2 gallons.
Their other clears are different, I haven't tried them.
 
#3 ·
Originally posted by jcclark@Aug 4 2010, 12:33 PM~18227070
I've used the "Universal" a lot and really like it.
It's a soft clear, you can buff it easily even months later.
Makes it good for chip resistance and flexible parts.
It's a 1 to 1 mix so a 1 gallon kit makes 2 gallons.
Their other clears are different, I haven't tried them.
I like to use the Euro 2020 clear a 4:1 mix ratio, its a little on the high solids side
 
G
#4 ·
Originally posted by jcclark@Aug 4 2010, 12:33 PM~18227070
I've used the "Universal" a lot and really like it.
It's a soft clear, you can buff it easily even months later.
Makes it good for chip resistance and flexible parts.
It's a 1 to 1 mix so a 1 gallon kit makes 2 gallons.
Their other clears are different, I haven't tried them.
only clears i will use on my cars! i typically use universla and MS clear
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top