Kit Diagrams/Instructions
Welcome to the LayItLow.com Lowrider Forums.
LayItLow.com is the premier Lowriders Forum on the internet. Registered Users do not see the above ads.
+ Reply to Thread
Page 1 of 26 1 2 3 11 ... LastLast
Results 1 to 20 of 515
Like Tree1Likes

Thread: Kit Diagrams/Instructions

  1. #1
    Enthusiast Poster
    Join Date
    Nov 2001
    Location
    TORONTO
    Posts
    110

    Default

    Complete Plumbing Instructions: http://www.coolcars.org/tech/air/

    ================================================== ========


















    3switch diagram, for a basic Front/Back Setup




    10Switch Box Guide
    Switch box diagram


    Red – power wire 12v [make sure its fused with a 10amp fuse]
    Black – driver front up
    White= driver front down
    Blue=- passenger front up
    White/green=passenger front down
    Yellow=driver rear up
    Brown= driver rear down
    Yellow/white= passenger rear up
    Green= passenger rear down
    Last edited by PLANETGETLOW; 11-05-2011 at 10:25 AM.
    DillonOpossum likes this.

  2. Remove Advertisements
    LayItLow.com
    Advertisements
     

  3. #2
    Enthusiast Poster
    Join Date
    Nov 2001
    Location
    TORONTO
    Posts
    110

    Default

    We will get this made a sticky. Allot of people asking me for basic diagrams, if anybody has requests let me know we can add them to this 1 thread.

    OOPS MODERATORS move this to AIR RIDE FORUM

    THANKS

  4. #3
    Addict Poster
    Join Date
    Oct 2006
    Location
    from the 301 to the 305
    Car Club
    Low-Riders CC
    Posts
    2,755

    Default

    this is great for people like me

  5. #4
    Enthusiast Poster
    Join Date
    Nov 2001
    Location
    TORONTO
    Posts
    110

    Default

    Offset cups. How should they sit in a control arm setup?




  6. #5
    Enthusiast Poster
    Join Date
    Feb 2005
    Location
    Washington, D.C.
    Posts
    224

    Default

    Awesome! =)
    Jaxon
    1964 Ford Galaxie Four Door 352FE
    2007 Chrysler 300C Cool Vanilla

  7. #6
    I Dig Chix Wit Glasses!!!
    Join Date
    Feb 2002
    Posts
    14,255

    Default

    WOOO HOOO finally a diagram topic and PINNED!!! Will be putting in some of my own soon
    IT'S OFFICIAL I'M BACK TO IMPORTS

    Quote: screwed up loco, Feb 4 2006, 07:11 PM
    I GOT TIRED OF ALWAYS LOSIN MY TEMPER WITH BITCHES. I JUST SMILE AND ACCEPT THEM FOR WHAT THEY ARE..........BITCHES.

    Quote: phatz, Mar 13 2006, 04:00 PM
    3/4" is overkill homeboy.

    Altered Altitude Customs 1.866.FUKN.LOW
    Serving Canada and the United States
    http://www.airaissted.com - store

  8. #7
    Baller Poster
    Join Date
    Dec 2007
    Location
    *Roc NY*
    Posts
    376

    Default

    may sound lame but to us noobs to this it will help. how far do you tighten the valves and fittings?? hand tight and quarter turn or what?
    Hooker the other white meat

  9. #8
    Newbie
    Join Date
    Apr 2008
    Posts
    6

    Default

    i wanna bag the front suspension of my lowrider trike...how do i go about gettingthe parts i need?

  10. #9
    Enthusiast Poster
    Join Date
    Nov 2001
    Location
    TORONTO
    Posts
    110

    Default

    Crank the fittings untill they are really tight, hard to explain the exact amount of pressure needed, different size fittings need different amount of torque.

    a 1/8" fitting wont be as tight as a 3/4" fitting.

  11. #10
    I Dig Chix Wit Glasses!!!
    Join Date
    Feb 2002
    Posts
    14,255

    Default

    Originally posted by PeX$i@May 7 2008, 01:27 AM~10596525
    i wanna bag the front suspension of my lowrider trike...how do i go about gettingthe parts i need?
    What u want to do is to get 1 Bimba 2/3 inch stroke mini cylinders. Hit up Ebay for one, search for Bimba air cylinders.
    That cyllinder goes in place of the spring up front.

    The set will only a paddle switch, the bike is light so a good 60/80 psi may even hop. Tank, I like the compact CO2 bottles for paint guns. The tricky part would be the tank adapter will have a diagram for u 2morrow.

    Too much 2 rite on a blackberry
    IT'S OFFICIAL I'M BACK TO IMPORTS

    Quote: screwed up loco, Feb 4 2006, 07:11 PM
    I GOT TIRED OF ALWAYS LOSIN MY TEMPER WITH BITCHES. I JUST SMILE AND ACCEPT THEM FOR WHAT THEY ARE..........BITCHES.

    Quote: phatz, Mar 13 2006, 04:00 PM
    3/4" is overkill homeboy.

    Altered Altitude Customs 1.866.FUKN.LOW
    Serving Canada and the United States
    http://www.airaissted.com - store

  12. #11
    I Dig Chix Wit Glasses!!!
    Join Date
    Feb 2002
    Posts
    14,255

    Default

    Originally posted by elitdogg@May 6 2008, 06:16 PM~10592514
    may sound lame but to us noobs to this it will help. how far do you tighten the valves and fittings?? hand tight and quarter turn or what?
    What I do is hand tighten the fitting as tight as I can, then tighten w/the wrench 2/3 more turns.

    When you start hearing a noisy squeak you may be over doing it.
    IT'S OFFICIAL I'M BACK TO IMPORTS

    Quote: screwed up loco, Feb 4 2006, 07:11 PM
    I GOT TIRED OF ALWAYS LOSIN MY TEMPER WITH BITCHES. I JUST SMILE AND ACCEPT THEM FOR WHAT THEY ARE..........BITCHES.

    Quote: phatz, Mar 13 2006, 04:00 PM
    3/4" is overkill homeboy.

    Altered Altitude Customs 1.866.FUKN.LOW
    Serving Canada and the United States
    http://www.airaissted.com - store

  13. #12
    Newbie
    Join Date
    Apr 2008
    Posts
    6

    Default

    everyone has air cylinders...i dont like how they look ..."its not my cup of tea"....i wanna get an air bag small enough to replace the spring....the length of the bag doesnt matter its just the dia. of the bag...if all fails ill fabricate a bag out off r/c tires....its just have to hope the 100-200 psi wont pop it...i have a small 9oz co2 tank but imma use 3500/68 compress air aluminun tank...im down to go with the solenoid valves...

  14. #13
    I Dig Chix Wit Glasses!!!
    Join Date
    Feb 2002
    Posts
    14,255

    Default

    Originally posted by PeX$i@May 8 2008, 12:57 AM~10605716
    everyone has air cylinders...i dont like how they look ..."its not my cup of tea"....i wannaÂ* get an air bag small enough to replace the spring....the length of the bag doesnt matter its just the dia. of the bag...if all fails ill fabricate a bag out off r/c tires....its just have to hope the 100-200 psi wont pop it...i have a small 9oz co2 tank but imma use 3500/68 compress air aluminun tank...im down to go with the solenoid valves...
    True, but there isn't a small enough bag for the front, if u can fab a bag damn that be tight as hell. 200 psi is too much. Keep in mind u don't have an engine in that. There's 1/8" valves but don't go past 1/4" valves. Going higher on cetain parts would be unessessary.
    U are also going to need a batt for noid valves. I've always been curious about those power wheel batts. It says 12v on it worth a try if u get ur hands on one.

    IT'S OFFICIAL I'M BACK TO IMPORTS

    Quote: screwed up loco, Feb 4 2006, 07:11 PM
    I GOT TIRED OF ALWAYS LOSIN MY TEMPER WITH BITCHES. I JUST SMILE AND ACCEPT THEM FOR WHAT THEY ARE..........BITCHES.

    Quote: phatz, Mar 13 2006, 04:00 PM
    3/4" is overkill homeboy.

    Altered Altitude Customs 1.866.FUKN.LOW
    Serving Canada and the United States
    http://www.airaissted.com - store

  15. #14
    Newbie
    Join Date
    Apr 2008
    Posts
    6

    Default

    then i guess keeping it under 100 psi would be best...battery isnt a problem cuz of the sound system...ill make the sleeve(air bag) fit betwwen the forks...im getting custom forks from wicked....thanxs for your help....you,re life saver...but i have a feeling that my bike isnt gonna be ready for the good times highland park show in june....again thanx



  16. #15
    I Dig Chix Wit Glasses!!!
    Join Date
    Feb 2002
    Posts
    14,255

    Default

    Originally posted by PeX$i@May 8 2008, 10:07 PM~10612760
    then i guess keeping it under 100 psi would be best...battery isnt a problem cuz of the sound system...ill make the sleeve(air bag) fit betwwen the forks...im getting custom forks from wicked....thanxs for your help....you,re life saver...but iÂ* have a feeling that my bike isnt gonna be ready for the good times highland park show in june....again thanx
    If ur getting the prohopper ones ur on the rite track. Post up when start I'd like to see what u come up with.
    HP show can wait. Take ur time an get it done right.
    IT'S OFFICIAL I'M BACK TO IMPORTS

    Quote: screwed up loco, Feb 4 2006, 07:11 PM
    I GOT TIRED OF ALWAYS LOSIN MY TEMPER WITH BITCHES. I JUST SMILE AND ACCEPT THEM FOR WHAT THEY ARE..........BITCHES.

    Quote: phatz, Mar 13 2006, 04:00 PM
    3/4" is overkill homeboy.

    Altered Altitude Customs 1.866.FUKN.LOW
    Serving Canada and the United States
    http://www.airaissted.com - store

  17. #16
    Newbie
    Join Date
    Apr 2008
    Posts
    6

    Default

    i have some pix of what i have done so far on my myspace if you wanna check it out.....im learning as i go...www.myspace.com/pepe_el_toro

  18. #17
    I Dig Chix Wit Glasses!!!
    Join Date
    Feb 2002
    Posts
    14,255

    Default

    Originally posted by PeX$i@May 9 2008, 08:43 PM~10620065
    i have some pix of what i have done so far on my myspace if you wanna check it out.....im learning as i go...www.myspace.com/pepe_el_toro
    set it to public.
    IT'S OFFICIAL I'M BACK TO IMPORTS

    Quote: screwed up loco, Feb 4 2006, 07:11 PM
    I GOT TIRED OF ALWAYS LOSIN MY TEMPER WITH BITCHES. I JUST SMILE AND ACCEPT THEM FOR WHAT THEY ARE..........BITCHES.

    Quote: phatz, Mar 13 2006, 04:00 PM
    3/4" is overkill homeboy.

    Altered Altitude Customs 1.866.FUKN.LOW
    Serving Canada and the United States
    http://www.airaissted.com - store

  19. #18
    Newbie
    Join Date
    Apr 2008
    Posts
    6

    Default

    here is a preview of my project...i call it "WTF!"










  20. #19
    Newbie
    Join Date
    Apr 2008
    Posts
    6

    Default

    its public

  21. #20
    Addict Poster
    Join Date
    Oct 2005
    Location
    Michigan
    Posts
    9,996

    Default

    Originally posted by PeX$i@May 10 2008, 10:05 PM~10625397
    here is a preview of my project...i call it "WTF!"









    i call it FAILED
    Hearse Project " End of Days " http://www.layitlow.com/forums/29-pr...-end-days.html
    Rape: avoiding awkward first dates.

  22. Remove Advertisements
    LayItLow.com
    Advertisements
     


 
+ Reply to Thread
Page 1 of 26 1 2 3 11 ... LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts