I HAVE A FIBERGLASS CHOPPER GUN, WHICH IS USED TO LAY FIBERGLASS OUT, THERE IS A WHOLE MESS OF THINGS YOU CAN USE THIS EQUIPMENT FOR, FROM MAKING MOTORCYCLE PARTS, FIBERGLASS INTERIORS, AUTOMOTIVE PARTS, SWIMMING POOLS, THE LIST GOES ON. MACHINE COST OVER 10G'S NEW, IM ASKING 6,000 OBO, IT IS LOCATED IN TEXAS, YOU WILL MAKE YOUR MONEY BACK IN NO TIME! SERIOUS INQUIRES ONLY, MIGHT TAKE A PARTIAL CASH AND VEHICLE TRADE DEPENDS ON WHAT YOU OFFER. THIS IS IN TIP TOP SHAPE! HOPEFULLY SUMONE IS INTERESTED IT IS TAKING UP A BUNCH OF ROOM. HERE ARE THE SPECS ON IT.
SPRAY & DISPENSING SYSTEMS
SUPERB MATERIAL PATTERN
* NO ATOMIZATION * LOWER STYRENE EMISSIONS * EXCELLENT GLASS DISPURSION WITH ADJUSTABLE "OUTLAW" CHUTE *
No blow by
No bounce back
Internal-mix at the nose of the gun for minimum flushing
Easy cleaning GS "Flat-Flow Tip"
Retro-fit gun/chopper kits for existing units
CNC machined from billet aluminum
GS MEKP Slave-system
Read our Full Press Release Online
Patent #5,863,129 and 5,947,390
The SUPERFLOW chopper system from GS Manufacturing, Costa Mesa, California, has set new standards in performance for the new generation of flowcoat chopper units. The patent pending FI Superflow nozzle coupled with the "Outlaw Chute" on the GS chopper motor gives the fabricator total control over the laminating characteristics that are required for today's composites manufacturers.
In the past couple of years, flowcoat chopping left alot to be desired in comparison with traditional spray chopper systems. GS addressed the problems attributed to the poor quality of laminate, plugged nozzles, etc. BEFORE the SUPERFLOW was introduced in early 1998. As the new millennium approaches, the original SUPERFLOW package is now the "ONE GUN" that is leading the way. Here's why:
FI SUPERFLOW nozzle (patent pending) -- The first flowcoat nozzle with a SINGLE ROW of 21 holes creates a perfect pattern to carry the glass to the mold. Use the 17 or 19 hole nozzle for a narrower pattern.
MIXING -- The PATENTED mixing elements in the superflow head provide a total mix of resin and MEKP. These reusable mixers virtually eliminate blockages in the flow nozzle. A quick blast of solvent from the STANDARD 4:1 ratio pump keeps the mixers and nozzles clean! Daily replacement of the mixers in NOT necessary.
GLASS PATTERN & DISPERSION -- Glass fallout and flying strands are not an issue if your using the SUPERFLOW. The "Outlaw chute" on the chopper motor gives the operator total control of the glass as it centers the streams of resin, allowing for a pattern that is un-equaled in the field.
RASCAL GUN -- It's lighter, better balanced and has a 2 stage air-operated trigger that REDUCES OPERATOR FATIGUE. The simple design and ease of maintenance will most certainly lower spare gun parts inventory.
PUMPING SYSTEM -- GS uses a 22:1 ratio resin pump as standard equipment on the SUPERFLOW. Run at a very low pressure with low viscosity resins or crank it up for thicker material or extra long hose sets. YOU HAVE THE POWER!
LEARNING CURVE -- Sometimes with change there is resistance, especially if the operator has to deal with a new gun that makes their job more difficult. Once a laminator uses a SUPERFLOW - they won't give it up!
30 PPM -- Recent tests for V.O.C. emissions with the SUPERFLOW showed readings of only 30 PPM.
There really is no secret, no reason to compromise the production or quality of composite parts produced by a flowcoat chopper. There's just the GS SUPERFLOW.
If you would like more information on this product please go to our product inquiry page.