Lowrider Forums - Recent Blogs Posts - Blogs
Welcome to the Lowrider Forums. is the premier Lowriders Forum on the internet. Registered Users do not see the above ads.
View RSS Feed

Recent Blogs Posts

  1. Pneumatic Quick Coulings from China

    by , 11-25-2015 at 10:41 PM
    Pneuflex Quick Couplers can be nickle plated and nature brass body. One touch fittings and tow touch fittings can be seclected. One touch fittings are very converient in using connect the penumatic equipment. Tow touch fittings is cheaper than one touch fittings, but the material is same as one touch fittings.
    As material, there are steel quick coupler, brass quick coupler, Coupler has two parts, one is socket, the other is plug, socket is usually check valve.
    Quick coupler can be used ...
  2. The strict quanlity control of every pneumatic fitting in manfacturer Pneuflex

    by , 11-25-2015 at 12:33 AM
    Pneumatic Fittings from Pneuflex has a strict process of the peoducts quality control from start to the end. The workers in the workshop are beginning with inspecting parts, they produce the parts to coat Teflon and assemble after the samples are tested. Then the every finished product is test by the inspectors. Finally, we must have a last checking to ensure the quality after make the packing.
    So every fittings incloud plastic push in fittings, brass pipe fittings, stainless steel tube fittings, ...
  3. PC Series Male Straight Pneumatic Fittings from Pneuflex

    by , 11-25-2015 at 12:02 AM
    Pneuflex part NO. PC series, male straight push in fittings. Use for connecting air tubing and air valve, air cylinder, and other female thread.

    PC male connector thread: BSPT thread, PT thread, "R" thread, tapered thread, use seal tapes or thread sealant to keep from leaking.
    NPT thread, American-Standard, tapered thread, use seal tapes or thread sealant to keep from leaking.
    BSPP thread, "G" thread, parallel thread with O-ring.
    Sleeve size (push ...
  4. Pneuflex Pneumatic Silencers and Mufflers

    by , 11-24-2015 at 11:56 PM
    Pneuflex pneumatic silencers are engineered to provide an optimal balance between noise reduction and acceptable backpressure in the pneumatic system. The pneumatic mufflers can effectively reduce pneumatic equipment noise.
    The porous plastic silencers offer numerous advantages including significantly lower weight, ability to filter particles and aerosols, durability, assembly speed, and cost efficiency.
    But the metal silencers incloud brass silencers and stainless steel mufflers on ...
  5. The most popular fittings - male connector push to connect fittings for 3D printers

Page 1 of 225 1 2 3 11 51 101 ... LastLast