LayItLow.com Lowrider Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
1,105 Posts
Discussion Starter · #1 ·
GOT A FEW SETS OF 62-64 PINCH WELDS WITH THE FACTORY ENDS WELDED AND A FEW 1961 PINCH WELDS THAT ARE ONE PIECE AND MOT WELDED AT THE ENDS
POLISHED AND REPAIRED AND A FEW RIGHT SIDES SOME HAVE HAD THE SNAPS REMOVED FOR BETTER POLISHING YOU CAN BUY THE SNAP KIT FOR ABOUT $60 ON EBAY OR CARSHOP
62-64 $550 A SET AND THE 1961 $700 A SET AND THE SINGLES DRIVER SIDES $300 EACH


Pipe Asphalt Road Concrete
Race track Pipe Sport venue Asphalt Metal
Race track Sport venue
Race track Sport venue Asphalt Road Concrete
Auto part Automotive exterior Bumper Pipe
Bumper Auto part Automotive exterior
Pipe Auto part
Bumper Pipe Tire Automotive tire Automotive exterior
Auto part Pipe Steel Metal
Pipe Metal
 

·
Registered
Joined
·
3,239 Posts
Is 61 show quality
 

·
Registered
Joined
·
3,239 Posts
Lmk
 

·
Registered
Joined
·
1 Posts
GOT A FEW SETS OF 62-64 PINCH WELDS WITH THE FACTORY ENDS WELDED AND A FEW 1961 PINCH WELDS THAT ARE ONE PIECE AND MOT WELDED AT THE ENDS
POLISHED AND REPAIRED AND A FEW RIGHT SIDES SOME HAVE HAD THE SNAPS REMOVED FOR BETTER POLISHING YOU CAN BUY THE SNAP KIT FOR ABOUT $60 ON EBAY OR CARSHOP
62-64 $550 A SET AND THE 1961 $700 A SET AND THE SINGLES DRIVER SIDES $300 EACH


View attachment 1054289 View attachment 1054297 View attachment 1054305 View attachment 1054313 View attachment 1054321 View attachment 1054329 View attachment 1054337 View attachment 1054345 View attachment 1054353 View attachment 1054361
do you still have any pinch weld moldings for a 1964 impala
 

·
Registered
Joined
·
1 Posts
GOT A FEW SETS OF 62-64 PINCH WELDS WITH THE FACTORY ENDS WELDED AND A FEW 1961 PINCH WELDS THAT ARE ONE PIECE AND MOT WELDED AT THE ENDS
POLISHED AND REPAIRED AND A FEW RIGHT SIDES SOME HAVE HAD THE SNAPS REMOVED FOR BETTER POLISHING YOU CAN BUY THE SNAP KIT FOR ABOUT $60 ON EBAY OR CARSHOP
62-64 $550 A SET AND THE 1961 $700 A SET AND THE SINGLES DRIVER SIDES $300 EACH


View attachment 1054289 View attachment 1054297 View attachment 1054305 View attachment 1054313 View attachment 1054321 View attachment 1054329 View attachment 1054337 View attachment 1054345 View attachment 1054353 View attachment 1054361
hey do u still have rear pinch well for 1963 convertible impala?
 

·
Registered
Joined
·
2 Posts
GOT A FEW SETS OF 62-64 PINCH WELDS WITH THE FACTORY ENDS WELDED AND A FEW 1961 PINCH WELDS THAT ARE ONE PIECE AND MOT WELDED AT THE ENDS
POLISHED AND REPAIRED AND A FEW RIGHT SIDES SOME HAVE HAD THE SNAPS REMOVED FOR BETTER POLISHING YOU CAN BUY THE SNAP KIT FOR ABOUT $60 ON EBAY OR CARSHOP
62-64 $550 A SET AND THE 1961 $700 A SET AND THE SINGLES DRIVER SIDES $300 EACH


View attachment 1054289 View attachment 1054297 View attachment 1054305 View attachment 1054313 View attachment 1054321 View attachment 1054329 View attachment 1054337 View attachment 1054345 View attachment 1054353 View attachment 1054361
Do you still have a set for 63 convertible?
 

·
Registered
Joined
·
1 Posts
GOT A FEW SETS OF 62-64 PINCH WELDS WITH THE FACTORY ENDS WELDED AND A FEW 1961 PINCH WELDS THAT ARE ONE PIECE AND MOT WELDED AT THE ENDS
POLISHED AND REPAIRED AND A FEW RIGHT SIDES SOME HAVE HAD THE SNAPS REMOVED FOR BETTER POLISHING YOU CAN BUY THE SNAP KIT FOR ABOUT $60 ON EBAY OR CARSHOP
62-64 $550 A SET AND THE 1961 $700 A SET AND THE SINGLES DRIVER SIDES $300 EACH


View attachment 1054289 View attachment 1054297 View attachment 1054305 View attachment 1054313 View attachment 1054321 View attachment 1054329 View attachment 1054337 View attachment 1054345 View attachment 1054353 View attachment 1054361
Hello Do you still have a set of Pinchweld Chrome?
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top