LayItLow.com Lowrider Forums banner
1 - 16 of 16 Posts

· Registered
Joined
·
5,130 Posts
Discussion Starter · #1 ·
that are advertised as having better flow. anyone running them or used them at all. they cost more than the 3/4" blocks. ill be running 2 pumps and want to get some decent inches up front no gonna hop but you know ill be playing with it.
 

· Registered
Joined
·
4,996 Posts
pass on then for double you cant enjoy the 45 degress becaose where the output on the blocks you have to put another 45 on it to geta straight shot there goes your advantage..
 

· Face Puncher
Joined
·
18,290 Posts
Originally posted by ROCKSOLID84@Sep 6 2005, 03:46 PM~3762543
pass on then for double you cant enjoy the 45 degress becaose where the output on the blocks you have to put another 45 on it to geta straight shot there goes your advantage..
i dunno, 2 45° bends an inch or so apart is a hell of a lot less restrictive than a 90° fitting right on the outlet, which is what most people end up with...
 

· Registered
Joined
·
4,996 Posts
Originally posted by 216RIDER@Sep 6 2005, 02:19 PM~3762794
i dunno, 2 45° bends an inch or so apart is a hell of a lot less restrictive than a 90° fitting right on the outlet, which is what most people end up with...
if you turn the pump sideways and get a straight shot your not losin much... :cool:
 

· Registered
Joined
·
5,130 Posts
Discussion Starter · #6 ·
im very new to hydraulics but you mean like this will give me better flow
 

Attachments

· Registered
Joined
·
5,130 Posts
Discussion Starter · #9 ·
Originally posted by 216RIDER@Sep 6 2005, 08:34 PM~3766031
that drawing will do nothing to help give you better flow.
dammitt i was gonna sell copies in the classfieds for $3.

but i have the right idea dont i?
 

· Registered
Joined
·
5,130 Posts
Discussion Starter · #11 ·
and obviously a bend is a restriction
 

· Premium Member
Joined
·
6,890 Posts
Originally posted by BuThatsaCHRYSLER@Sep 6 2005, 10:42 AM~3761639
that are advertised as having better flow. anyone running them or used them at all. they cost more than the 3/4" blocks. ill be running 2 pumps and want to get some decent inches up front no gonna hop but you know ill be playing with it.
THE 45 LOOK CLEAN...BUT I WONT LIE...THERE IS NOW ADVANTAGE .....I'VE HAD BETTER PERFORMANCE WIT 3/4 AND A 90 DEGREE FITTING ...... :biggrin:
 

· Registered
Joined
·
4,996 Posts
Originally posted by BlackMagicHydraulics@Sep 6 2005, 11:46 PM~3766873
THE 45 LOOK CLEAN...BUT I WONT LIE...THERE IS NOW ADVANTAGE .....I'VE HAD BETTER PERFORMANCE WIT 3/4 AND A 90 DEGREE FITTING ...... :biggrin:

the truth will set you free..... :thumbsup:
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top