LayItLow.com Lowrider Forums banner

1 - 20 of 60 Posts

·
Registered
Joined
·
1,281 Posts
Discussion Starter #1
I am wondering, what are the pro's and cons of the dumps mentioned above...

Alot of folks say the Adex is the way to go, yet alot of people like the Monster green..... Also, list other quality dumps for hopping....

This should be interesting... :biggrin:
 

·
Registered
Joined
·
13,248 Posts
ive used vickers.

:),

cc
 

·
Registered
Joined
·
1,281 Posts
Discussion Starter #3
vickers eh.....

Pic? How good are they for hopping?
 

·
Registered
Joined
·
2,430 Posts
This is the dump you've been looking for. 2 years of testing was put into this dump before introducing it to the public. This is the strongest and most accurate dump available on the market.

<---Vickers

 

·
Registered
Joined
·
1,281 Posts
Discussion Starter #6
DAMN HOMIE! j/k....

Seriously HYDROTA, You using them on your truck? What do they run $? Is that yours in your avitar? I remember you sent me a bunch of video's a while back.... LOVE YOUR TRUCK MAN! Still got the website with your truck on it? Post a link...



Last edited by vwlownslo at Oct 8 2003, 09:25 PM
 

·
Registered
Joined
·
2,430 Posts
The quote and pic are are from the cce website. I have one dumping the front 2 pumps on my truck.. I havent made a new website for the truck yet. I will email you the whole video that the avitar is from in a minute if you give me your email adress again. If anyone else wants it pm me your email adress, it has to be a real adress and not a free one cause it has to be able to accept a 3mb movie.
 

·
Registered
Joined
·
13,248 Posts
Originally posted by [email protected]@Oct 8 2003, 07:17 PM
waterman squares!!!!! :roflmao: :roflmao: :roflmao: j/k
i have those on the rear of my ex show car still.

:cheesy: ,

cc
 

·
Registered
Joined
·
13,248 Posts
Originally posted by hydrota@Oct 8 2003, 07:19 PM
This is the dump you've been looking for. 2 years of testing was put into this dump before introducing it to the public. This is the strongest and most accurate dump available on the market.

<---Vickers

hydrota,

can i ask for more specifics on this dump, data and figures if you can provide them.

i'm a vickers user too :) :) :), i thought i was the only one.

:),

cc
 

·
\m/ WTF? FTW! \m/
Joined
·
13,648 Posts
Adex, best warranty there is. But buy what you want to buy, winners have Adex.
 

·
Registered
Joined
·
284 Posts
adex dumps are way over priced there is no more then $50 in parts in them and they charge $450 and up,you can buy 8-10 oil system dumps for that and they work just as good.when the dump cost more then pump there is something wrong, and the price been going up for years when it should be going down.
 

·
Registered
Joined
·
13,248 Posts
Originally posted by havok@Oct 8 2003, 08:54 PM
adex dumps are way over priced there is no more then $50 in parts in them and they charge $450 and up,you can buy 8-10 oil system dumps for that and they work just as good.when the dump cost more then pump there is something wrong, and the price been going up for years when it should be going down.
in my opinion, the next dump down from an adel clone, is a vickers.

good dump and inexpensive, a vickers will out perform an oil filled dump like italians for only $30 - $40 more.

i know homies, who have used both and stay with vickers??? to each his own, but i've had good experiences with them.

i've installed adel clones on other setups and they are excellent.

hydrota seems to be doing well on vickers(understatement) :cheesy: :cheesy: :cheesy: too,

cc



Last edited by Cruz_Campos at Oct 8 2003, 09:27 PM
 

·
Registered
Joined
·
395 Posts
Nobody has actually answered the questions at hand. So I'll give you my thoughts. I'm sure I'll be corrected if I'm wrong!

The Adex is an excellent dump -- a modern recreation of the old Adel square dumps, which are hard to come by -- and expensive for that reason. All of the old aircraft square dumps like the ones you mention are of high quality and similary hard to come by. You can use them for hopping.

If you're into old school, chase up the aircraft dumps. If you don't want the headache and expense of chasing up hard to come by parts and just want the inches, buy Adex.
 

·
Registered
Joined
·
2,430 Posts
Originally posted by Cruz_Campos+Oct 8 2003, 09:15 PM--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Cruz_Campos @ Oct 8 2003, 09:15 PM)</td></tr><tr><td id='QUOTE'><!--QuoteBegin--hydrota@Oct 8 2003, 07:19 PM
This is the dump you've been looking for. 2 years of testing was put into this dump before introducing it to the public. This is the strongest and most accurate dump available on the market.

<---Vickers

hydrota,

can i ask for more specifics on this dump, data and figures if you can provide them.

i'm a vickers user too :) :) :), i thought i was the only one.

:),

cc[/b][/quote]
takes adobe acrobat reader

http://hydraulics.eaton.com/products/pdfs/...5049en0596a.pdf
 

·
Registered
Joined
·
13,248 Posts
Originally posted by hydrota+Oct 8 2003, 10:37 PM--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (hydrota @ Oct 8 2003, 10:37 PM)</td></tr><tr><td id='QUOTE'>
Originally posted by [email protected] 8 2003, 09:15 PM
<!--QuoteBegin--hydrota
@Oct 8 2003, 07:19 PM
This is the dump you've been looking for. 2 years of testing was put into this dump before introducing it to the public. This is the strongest and most accurate dump available on the market.

<---Vickers


hydrota,

can i ask for more specifics on this dump, data and figures if you can provide them.

i'm a vickers user too :) :) :), i thought i was the only one.

:),

cc
takes adobe acrobat reader

http://hydraulics.eaton.com/products/pdfs/...5049en0596a.pdf[/b][/quote]
thank you very much


:),

cc
 

·
Registered
Joined
·
13,248 Posts
Originally posted by Cruz_Campos+Oct 8 2003, 10:53 PM--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Cruz_Campos @ Oct 8 2003, 10:53 PM)</td></tr><tr><td id='QUOTE'>
Originally posted by [email protected] 8 2003, 10:37 PM
Originally posted by [email protected] 8 2003, 09:15 PM
<!--QuoteBegin--hydrota
@Oct 8 2003, 07:19 PM
This is the dump you've been looking for. 2 years of testing was put into this dump before introducing it to the public. This is the strongest and most accurate dump available on the market.

<---Vickers


hydrota,

can i ask for more specifics on this dump, data and figures if you can provide them.

i'm a vickers user too :) :) :), i thought i was the only one.

:),

cc

takes adobe acrobat reader

http://hydraulics.eaton.com/products/pdfs/...5049en0596a.pdf
thank you very much


:),

cc[/b][/quote]
hydrota i'm a nerd and a bookworm as well.

i've read the specs. but i'm having a hard time making sense of the technical terms.

when you have time could you please break it down???

i'm very interested in it.


thank you in advance :),

cc
 

·
Registered
Joined
·
3,686 Posts
I have had the vicckers and an adex and this was why I changed.....

with the vicckers on my car the front couldn't stay locked up it would bleed down.......everything was changed except the dumps and it still seeped. It stopped seeping when I took off the vicckers and put on an Adex......that is proof enough for me......not trying to bash anyones equipment or opinions but I have had both and know what I think.
 

·
\m/ WTF? FTW! \m/
Joined
·
13,648 Posts
Originally posted by havok@Oct 8 2003, 11:54 PM
adex dumps are way over priced there is no more then $50 in parts in them and they charge $450 and up,you can buy 8-10 oil system dumps for that and they work just as good.when the dump cost more then pump there is something wrong, and the price been going up for years when it should be going down.
$50 dollars in parts. :roflmao: :roflmao: :roflmao: :roflmao:

Yeah maybe, but there is a alot of money in machining too. If you think Adex is not worth $450 you are either too poor to buy one, or you just have no clue.
 
1 - 20 of 60 Posts
Top