[BlackMagicHydraulics]

Alot of people have been asking me to do these, And I did a few proto types. But here is the finished version. I will offer them in chrome as well....

It is fully TIG welded and made of mild steel tube. The adjusters are the same used on the wishbone, which hold a tighter tolerance then a nut and bolt. The Y-bone will come with all hardware and brackets, no welding or fabrication needed. Just a drill and some wrenches.

Raw Y-bone complete kit will go for 350.00 and chrome for 450.00

 

[ACCESSORYFREAK]

:0

 

[CROWDS91]

:biggrin: Are they ready to go in stock i might have to pick up a chrome one for my club member!

 

[61 Impala on 3]

Since you have it bolted with a himes joint can you 3 wheel with it on?

 

[.TODD]

Originally posted by BlackMagicHydraulics@Jan 6 2009, 11:51 PM~12629757
Alot of people have been asking me to do these, And I did a few proto types. But here is the finished version. I will offer them in chrome as well....

It is fully TIG welded and made of mild steel tube. The adjusters are the same used on the wishbone, which hold a tighter tolerance then a nut and bolt. The Y-bone will come with all hardware and brackets, no welding or fabrication needed. Just a drill and some wrenches.

Raw Y-bone complete kit will go for 350.00 and chrome for 450.00

:0

 

[Hannibal Lector]

Nice quality work!

 

[SJDEUCE]

Originally posted by BlackMagicHydraulics@Jan 7 2009, 12:51 AM~12629757
Alot of people have been asking me to do these, And I did a few proto types. But here is the finished version. I will offer them in chrome as well....

It is fully TIG welded and made of mild steel tube. The adjusters are the same used on the wishbone, which hold a tighter tolerance then a nut and bolt. The Y-bone will come with all hardware and brackets, no welding or fabrication needed. Just a drill and some wrenches.

Raw Y-bone complete kit will go for 350.00 and chrome for 450.00

CHEAPER THEN REDS :0

 

[pipiz13]

Nice :cheesy:

 

[dirty_duece]

Originally posted by BlackMagicHydraulics@Jan 6 2009, 11:51 PM~12629757
Alot of people have been asking me to do these, And I did a few proto types. But here is the finished version. I will offer them in chrome as well....

It is fully TIG welded and made of mild steel tube. The adjusters are the same used on the wishbone, which hold a tighter tolerance then a nut and bolt. The Y-bone will come with all hardware and brackets, no welding or fabrication needed. Just a drill and some wrenches.

Raw Y-bone complete kit will go for 350.00 and chrome for 450.00

looks good whats the prices on wishbones????

 

[BlackMagicHydraulics]

Originally posted by 61 Impala on 3@Jan 7 2009, 06:18 AM~12630602
Since you have it bolted with a himes joint can you 3 wheel with it on?

Even if it was welded it would three wheel....The heim just allows you to track the axle from left to rite ...To center it up...

The pivot is at theend where it adjust pinion angle,,,that s for 3 wheel/ side to side movement :biggrin:

 

[maniak2005]

it def. seems like bmh has more than your normal hydro company. yes all the companies build them for your install but bmh actually has it posted on the site and ready to ship. :thumbsup:

 

[BigBlue64]

Originally posted by BlackMagicHydraulics@Jan 7 2009, 12:51 AM~12629757
Alot of people have been asking me to do these, And I did a few proto types. But here is the finished version. I will offer them in chrome as well....

It is fully TIG welded and made of mild steel tube. The adjusters are the same used on the wishbone, which hold a tighter tolerance then a nut and bolt. The Y-bone will come with all hardware and brackets, no welding or fabrication needed. Just a drill and some wrenches.

Raw Y-bone complete kit will go for 350.00 and chrome for 450.00

I should beable to run the skirts with the stock impala rear end on my 64 with out the rearend moving to the left correct. This will keep everything alinged?

 

[63 ss rider]

recieved mine on new years day, definetly built right, quality work always from Ron, and great customer service from Oj

 

[KINGFISH_CUSTOMS]

Originally posted by BigBlue64@Jan 7 2009, 10:52 PM~12638959
I should beable to run the skirts with the stock impala rear end on my 64 with out the rearend moving to the left correct. This will keep everything alinged?

the wishbone or the Y bone will keep ur axle centered and u can run skirt...assuming ur lowe trailing arm bushing arent shot lol

 

[BlackMagicHydraulics]

Originally posted by maniak2005+Jan 7 2009, 10:47 PM~12638914-->

it def. seems like bmh has more than your normal hydro company. yes all the companies build them for your install but bmh actually has it posted on the site and ready to ship. :thumbsup:
[/b]

Thanx

Originally posted by [email protected] 7 2009, 10:52 PM~12638959
I should beable to run the skirts with the stock impala rear end on my 64 with out the rearend moving to the left correct. This will keep everything alinged?

If the don't hit when its layed ,then yes...

<!--QuoteBegin-63 ss rider@Jan 7 2009, 10:55 PM~12638993
recieved mine on new years day, definetly built right, quality work always from Ron, and great customer service from Oj

Glad you liked it....I didn't want to do it...But O.J pulled a gun on me...He said you fucker

 

[BigBlue64]

Originally posted by KINGFISH_CUSTOMS@Jan 7 2009, 11:02 PM~12639065
the wishbone or the Y bone will keep ur axle centered and u can run skirt...assuming ur lowe trailing arm bushing arent shot lol

I put those energy suspension bushings those looked alot better then the og they try to sell you at the parts store. Hey Ron will those come with bushing in them already?

 

[63 ss rider]

Originally posted by BlackMagicHydraulics@Jan 7 2009, 09:04 PM~12639081
.
Glad you liked it....I didn't want to do it...But O.J pulled a gun on me...He said you fucker

yeah thats what he said, glad you tried something new

 

[EMPIRE CUSTOMS]

badass,.. but me likey the wishbone better :biggrin:

 

[KINGFISH_CUSTOMS]

Originally posted by BigBlue64@Jan 7 2009, 11:05 PM~12639090
I put those energy suspension bushings those looked alot better then the og they try to sell you at the parts store. Hey Ron will those come with bushing in them already?

we haev a spot here in modesto that sells them and these bushings arent pressed in...u can take them out and replace in like 30 seconds lol..

 

[BIGTONY]

Originally posted by BlackMagicHydraulics@Jan 6 2009, 10:51 PM~12629757
Alot of people have been asking me to do these, And I did a few proto types. But here is the finished version. I will offer them in chrome as well....

It is fully TIG welded and made of mild steel tube. The adjusters are the same used on the wishbone, which hold a tighter tolerance then a nut and bolt. The Y-bone will come with all hardware and brackets, no welding or fabrication needed. Just a drill and some wrenches.

Raw Y-bone complete kit will go for 350.00 and chrome for 450.00

Nice