im gettin new hardware, new rotors n a cylinder hone to rebuild the cylinders, i know what to do as far as replacing shit, buh as far as adjusting the starwheel how should i go about doing that , when will i know when i adjusted em enough?
adjusting rear brakes
Join the discussion
Recommended Reading
-
My schumacker turns on but dont charge
Maintenance & RepairHi I have a problem with my schumacker se-1072 .by mistake the ground was not unplugged so when the charger was on, by mistake someone hit a switch and ever since then it stop charging. The needles dont read a battery when I put on the clamps on terminal. So if anyone knows what part went it...- 1
- 103
-
Frame broke in rear
Maintenance & RepairFame just broke on way home.luckly bridge kept together..could i weld a 5/8 or 7/8 plates on both sides of frame or just look for new frame.- 1
- 129
-
Bramirez713 · updated
-
Noise in my motor
Maintenance & RepairSup lay low community..i got issue with pump..i took apart my back pump and got a new gear seal..put bck together and new oil in..but im hearing sum whut of a grinding noise and when raising the rear its a lil slow motion then whut was doing before took pump apart..when dumpin i have no issue...- 0
- 68
-
Bramirez713 · updated
-
1964 impala from drum to disc
Maintenance & RepairAfter reading a few posts on this subject I decided on doing the caprice spindle swap on my 64. None of the posts I looked through had enough pics that's why I'm posting pics as I go along. I bought the brake booster and master of ebay. the spindle's from the junk yard here's how the drum...- 523
- 96K
-
eric64impala · updated
-
63 impala brake lights
Maintenance & RepairTail lights , turn signals work and reverse work but brake lights won’t work . Replaced the headlight switch , still nothing. I have power going and coming from the brake light switch- 2
- 223
-
Wizzerd84 · updated
Join now to ask and comment!