[turnin-heads]

What kinda ball joints do you guys run? I keep striping the threads on my ball joints and the threads on the 4 bolts that holds them in.. I got them from Advance Auto...They are in a 82 cutty... What should I should use?

 

[LUCKY]

i got the best one napa sells for 25 a joint with lifetime

 

[Guest]

i got the moog ball joints from murrays auto parts $25.00 per life time warranty

 

[Dumps]

Originally posted by standin3d50@Sep 6 2005, 06:52 PM~3765145
What kinda ball joints do you guys run? I keep striping the threads on my ball joints and the threads on the 4 bolts that holds them in..  I got them from Advance Auto...They are in a 82 cutty... What should I should use?

How are you stripping the 4 bolts that hold them in? Are you putting them in from underneath? If so, you need to put them in from the top.
Anyway, napa ball joints for me. :biggrin:

 

[turnin-heads]

I put them in from top to bottom..
i will get me some napa joints........ fuck advance....

 

[enough_talkin]

napa's....dunno what your doing to strip the bolts though....

use some grade 8's if that problem keeps up

 

[mab69us]

come on some of the G-body hoppers out there tell us what kind of balljoints how bout Pinky what kind of ball joints and Pittbull what kind of ball joints everyone answer :dunno: :biggrin: :biggrin:

 

[Dumps]

As far as stripping the threads on the stud itself, try double nutting them. That is what I do. Just use the nuts off your old set and you should be cool. :biggrin:

 

[Chevillacs]

are these the unbreakable ball joints? where could i order some or where could i get em @?

 

[HighProCam]

I believe those are them.
Try there with that part number. :thumbsup:


BTW... Nice Avi :biggrin:

 

[Hater Hurter]

the hoppers are all using the unbreakables homie

just use the part no. off of that box

 

[HydroCutlass86]

Originally posted by hosscutlass@Sep 7 2005, 06:55 AM~3767566
i got the moog ball joints from murrays auto parts $25.00 per life time warranty

thats what im useing too,good so far

 

[blvddown]

FUCK EVERYTHING ELSE----GO WITH MOOG.............

 

[PatFuckin'Burke]

Chain your lower control arms and use the CCE ball joint rings and you will never break again.

 

[Guest]

Originally posted by blvddown@Oct 15 2005, 09:47 PM~4007695
FUCK EVERYTHING ELSE----GO WITH MOOG.............

you can buy 10 different ball joints, the only thing that changes is the box.