LayItLow.com Lowrider Forums banner

1 - 20 of 346 Posts

·
Premium Member
Joined
·
7,112 Posts
Discussion Starter #1
Pro Magic Balls</span>,The same power ball we've been selling for years !!!! One of our best sellers with over 60 plus pairs in stock. These balls will allow cylinder angles of 45 degrees ,with superior strength over any on the market and come with a black oxide rust resistent finish
<img src=\'http://i243.photobucket.com/albums/ff281/BlackMagicHydraulics/DIAGRAMMAGICBALL.jpg\' border=\'0\' alt=\'user posted image\' />
<img src=\'http://i243.photobucket.com/albums/ff281/BlackMagicHydraulics/DIAGRAM2MAGICBALL.jpg\' border=\'0\' alt=\'user posted image\' />
Priced @ 45.00 per pair...Or 39.00 if added to any kit !!!!!

We also offer a UNI-BALL, these are a universal ball that will work with any size cylinder shaft, these can exceed a 45 degree shaft angle with-out binding on ring.
<img src=\'http://i243.photobucket.com/albums/ff281/BlackMagicHydraulics/DIAGRAMUNI-BALL.jpg\' border=\'0\' alt=\'user posted image\' />
These balls are made off-shore and use a larger diameter housing to accomodate the bigger ball.
<img src=\'http://i243.photobucket.com/albums/ff281/BlackMagicHydraulics/TAXSPECIALS2010004.jpg\' border=\'0\' alt=\'user posted image\' />
Priced @ 55.00 per pair

The Gear Clamp, Fits Marzocchi and Rockford gears, When installed on a new gear, these clamps will Aid in the help of gear distortions, under extreme pressures !!!!! It will allow the gear to create and build more pressure with less loss of pressure from "bleed-off"... You'll notice faster responce and longer gear life with the Pressure clamp
35.00 each or <span style=\'color:red\'>60.00
for 2, we only have about 21 of these in stock, so hurry up and get them while they hot :biggrin:


I will post up more item's tomorrow and this offer will start on monday (02-08-10)till we sell-out :biggrin: Also to all our wholesalers and distributors, we will have added discounts for you. Thanks everyone for your support,,,Ron @ BMH
 

·
Registered
Joined
·
688 Posts
nice, gotta hit yall up on monday for some dealls :thumbsup:
 

·
Registered
Joined
·
8,976 Posts
damn ron can i call you tomorrow for that set up i wanted then. pm me or call me when you ready homie!
 

·
Premium Member
Joined
·
7,112 Posts
Discussion Starter #7
Forgot Jr. I'll hit ya tomorrow bro...

I had some P.M's about the new design, of the Rockford. So heres a few pics tp help


By smoothing this are , it allows more back pressure to force on the gear and pushes the gear to seal tighter into the suction side



You get the idea...With the small mass and less friction ,with the same cubic cm per revolution of displacment the more effecient this gear is. ;)
 

·
Registered
Joined
·
8,976 Posts
its all good brah! you got my number, i'll be chillin at home. shootz cuuuuz!
 

·
Registered
Joined
·
671 Posts
:0
Originally posted by BlackMagicHydraulics@Feb 7 2010, 04:17 AM~16538077
Pro Magic Balls</span>,The same power ball we've been selling for years !!!! One of our best sellers with over 60 plus pairs in stock. These balls will allow cylinder angles of 45 degrees ,with superior strength over any on the market and come with a black oxide rust resistent finish
<img src=\'http://i243.photobucket.com/albums/ff281/BlackMagicHydraulics/DIAGRAMMAGICBALL.jpg\' border=\'0\' alt=\'user posted image\' />
<img src=\'http://i243.photobucket.com/albums/ff281/BlackMagicHydraulics/DIAGRAM2MAGICBALL.jpg\' border=\'0\' alt=\'user posted image\' />
Priced @ 45.00 per pair...Or 39.00 if added to any kit !!!!!

We also offer a UNI-BALL, these are a universal ball that will work with any size cylinder shaft, these can exceed a 45 degree shaft angle with-out binding on ring.
<img src=\'http://i243.photobucket.com/albums/ff281/BlackMagicHydraulics/DIAGRAMUNI-BALL.jpg\' border=\'0\' alt=\'user posted image\' />
These balls are made off-shore and use a larger diameter housing to accomodate the bigger ball.
<img src=\'http://i243.photobucket.com/albums/ff281/BlackMagicHydraulics/TAXSPECIALS2010004.jpg\' border=\'0\' alt=\'user posted image\' />
Priced @ 55.00 per pair

The Gear Clamp, Fits Marzocchi and Rockford gears, When installed on a new gear, these clamps will Aid in the help of gear distortions, under extreme pressures !!!!! It will allow the gear to create and build more pressure with less loss of pressure from "bleed-off"... You'll notice faster responce and longer gear life with the Pressure clamp
35.00 each or <span style=\'color:red\'>60.00
for 2, we only have about 21 of these in stock, so hurry up and get them while they hot :biggrin: 
I will post up more item's tomorrow and this offer will start on monday (02-08-10)till we sell-out :biggrin: Also to all our wholesalers and distributors, we will have added discounts for you. Thanks everyone for your support,,,Ron @ BMH
:0 :0
 

·
Registered
Joined
·
2,797 Posts
Originally posted by BlackMagicHydraulics@Feb 7 2010, 07:20 AM~16538138
Forgot Jr. I'll hit ya tomorrow bro...

I had some P.M's about the new design, of the Rockford. So heres a few pics tp help


By smoothing this are , it allows more back pressure to force on the gear and pushes the gear to seal tighter into the suction side 



You get the idea...With the small mass and less friction ,with the same cubic cm per revolution of displacment the more effecient this gear is.  ;)
how much 4 a number 10 gear , id like to try one.
 

·
"Old School DJz"
Joined
·
484 Posts
Originally posted by rick383@Feb 7 2010, 08:40 AM~16538335
what about a 4 pump kit? :biggrin:
yeah... what's up on a 4 pump kit Ron? :biggrin:
 

·
Registered
Joined
·
8,976 Posts
TTT for some bad azz deals.
 
1 - 20 of 346 Posts
Top