LayItLow.com Lowrider Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
865 Posts
start by taking off all the trim pieces and pillars, allong with the visors. and the dome light and anything else that looks like it might be holding it up. then the headliner should come out. strip the existing material and use a wire brush or sander to remove the foam. prepping it is the most important step. the use a good quality adhesive to attatch your material. put the headliner back in place(helps to have a friends) and attach all the trim and pieces you removed. good luck and if you have any more questions just ask ;)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top