LayItLow.com Lowrider Forums banner

1 - 20 of 66 Posts

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #1
I am selling the rear end from my 64 convertible, it was built from a lincoln mark V and shortened but only 1/2 an inch per side which to me wasnt enough because i run skirts and sometimes when i turned corners I could hear the rim touch the skirt on one side. I also dont like the fact that its reinforced because my car is a lay and play car so it looks a little more beefy than my car needs so I put in a chrome Versailles.
This rear end was built by a race shop in Dallas who cut it down one inch used hardened race axles and new studs. Also comes with brand new rotors and the calipers have been chrome plated as well. I probably put less than 50 miles on it since it was built. The chroming on it is probably a little nicer than street quality but there are a couple small chips that happened from putting it in my car a couple months ago. take look at the pics, I have plenty. Originally the guy who built it planned to run double banana bar so I used a black magic Y bar and removed one banana bar mount. Its a good rear end for a street car none the less. Im asking 1000, it cost almost $2200 when it had been built originally.

I am in the Dallas Ft Worth Area









 

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #3


heres how it looked in my car. I just took it out today.

 

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #4
chroming one is atleast 800 with the centersection so you would be damn near getting the rear end for next to nothing. I just want it gone.
 

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #6
my car with skirts but yes it still rubbed when i turned corners. it measures 57" from brake surface to brake surface but 60" from mounting surface to mounting surface so its not narrowed as much as a versailles.

 

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #7
Originally posted by chilango1964@Jun 30 2010, 08:26 PM~17930769
Nice!! :cool:  how much to ship it to Toronto Canada
call old dominion trucking, i will put it on a pallet for you.
 

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #9
Originally posted by sand1@Jun 30 2010, 08:34 PM~17930833
smokin deal
yep, figure the cost of having all of the impala brackets welded onto a ford rear end including reinforcing it with the plate. brand new rotors $165 new Moser hardened unbreakable race axles cost $250 then chroming the housing and center section $800, chroming the calipers add another $100, chroming the dust shields another $100 then having it all reassembled and the lash set, its more than a grand trust me on that. not to mention the cost of the rear end itself.
 

·
Registered
Joined
·
4,934 Posts
Originally posted by Skim@Jun 30 2010, 08:44 PM~17930904
yep, figure the cost of having all of the impala brackets welded onto a ford rear end including reinforcing it with the plate.  new Moser hardened unbreakable race axles cost $250 then chroming the housing and center section $800, chroming the calipers add another $100, chroming the dust shields another $100 then having it all reassembled and the lash set, its more than a grand trust me on that.
i heard that u know everyone wants it for free :mad: :mad:
 

·
DOING IT MY WAY
Joined
·
7,898 Posts
If this is still here next week I may pick it up for my imp. :)
 

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #12
Originally posted by juangotti@Jun 30 2010, 09:20 PM~17931320
If this is still here next week I may pick it up for my imp. :)
well see :cool:
 

·
Registered
Joined
·
22,775 Posts
Skim got them good deals all day :cool:
 

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #15
Originally posted by tatersalad+Jun 30 2010, 10:23 PM~17931894-->
:angry:
[/b]
:0 put it on a pallet :biggrin:

<!--QuoteBegin-WestsideRider
@Jun 30 2010, 10:31 PM~17931979
Skim got them good deals all day :cool:
:cool:
 

·
Premium Member
Joined
·
58,442 Posts
Discussion Starter #17
Originally posted by Johnny_mumbles@Jun 30 2010, 11:50 PM~17932625
great fucking deal!!!  Damn i hate being broke :banghead:
:0
 

·
Registered
Joined
·
11,419 Posts
Originally posted by Skim@Jul 1 2010, 09:36 AM~17935247
Oh and i will consider trades  :cool:
WHAT WOULD IT COST TO SHIP TOO KOOL AIDS HYDRAULICS;;LET ME KNOW BIG AL
 

·
24/7 RIDA
Joined
·
3,285 Posts
Originally posted by WestsideRider+Jun 30 2010, 09:31 PM~17931979-->
Skim got them good deals all day :cool:
[/b]
Yes sir

<!--QuoteBegin-Johnny_mumbles
@Jun 30 2010, 10:50 PM~17932625
great fucking deal!!!  Damn i hate being broke :banghead:
I feel u
 
1 - 20 of 66 Posts
Top