LayItLow.com Lowrider Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3,258 Posts
Discussion Starter #1
just wired my compressor up and it wont kick in iam running a ride tech pressure switch and a wells solenoid
the pressure switch has power on both ends and all the grounds are good
i drew this up to how i have it wired let me know what you think could be wrong or if its wired up wrong
 

·
Registered
Joined
·
931 Posts
im sure you've already been thru the wireing, but the first place i would look are the grounds. after that, check that toggle switch you have and make sure its good.
 

·
Registered
Joined
·
10,665 Posts
umm,, the second little tab on the noid should be left bare, the noid pulls ground though the mounting points..

you may have burned the noid or the P/S up, bypass the P/S and jump power right to the noid, see if the comp kicks on..

good luck , be sure to post up your findings...
 

·
Registered
Joined
·
3,258 Posts
Discussion Starter #4
i wired it wrong
i had it ground to the second stud and not to the mounting points
thanks she works now
 

·
Registered
Joined
·
3,258 Posts
Discussion Starter #6
Originally posted by bigdanmcintosh@Aug 15 2003, 03:25 PM
I know, Thats why I am the MAN!!
:thumbsup:
 
1 - 6 of 6 Posts
Top