just wondering how to get at the front speakers of my cutlass..i assume the cover just pops off but i just want to make sure before i fuck something up..thanx
There is two screws on the covers that need to be taken off then just take a screwdriver and pry them up. Be careful cause you can crack your dash if you don't put something down to pry against. Hope this helps.
i dont think there are any srews on a cutty but the thing he said about not putting to much pressure on the dash is right just take you time and they should just pop right out :biggrin:
Your right on the screw thing. I was thinking of my old S10. Anyways, just pry the covers off and undo the 2 bolts on the speakers. Oh, and I have 3 cutty's so I should have remebered that. :biggrin:
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
LayItLow forum is an online community for true Lowriders. Come in and discuss hydraulics, air ride tech tips and all the information you need for dropping your lowrider.