OK the 3'8 is only available in single port , simple enough
the 1/2 inch is dual port, how do i plumb that up , i have eight vavles right now. DO i just plug the one port off, or is one for air in, and the other for air out? or are they both air in, adn i need 2 more valves or are they both air in, and i tee one valve?
on in and one out runs pretty good i have it on the towncar its the same as single port tee'd i guess if you were gonna hop it then both would be used for in
Dual ports are a bit over rated as it does not make much diffrence if you have one for fill and one for dump, it may make a diffrence if it was 3/4 line and valves and simply for hopping but not much else!.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
LayItLow.com Lowrider Forums
17.7M posts
191.1K members
Since 2002
LayItLow forum is an online community for true Lowriders. Come in and discuss hydraulics, air ride tech tips and all the information you need for dropping your lowrider.