Front raises croocked.

did you bleed the hoses? The ass end might be uneven too.

Nope, clearly just the front. If I pop the front, right side raises faster. Then when locked up, the slow side slowly looses pressure. (faster when in motion or on bumpy rides) Besides bad seals, Y would a cylinder lose pressure like that.

1 pump or 2 to the nose?

dumps ...or check valves

bent stroke???

Originally posted by ice64berg@Sep 14 2006, 08:01 PM~6176469
dumps ...or check valves

Click to expand...

gota be a really bad check valve or a leak in tha hose

it will come up uneven because of air in the lines. could be droping because of a dump valve or a check valve. also could be a hole in the hose, seal in the cylinder, broken fitting, loose fitting.

spring and cylinder on one side could be in a bind.. try jacking the car up and taking the pressure off the cylinders and springs and spin the springs a little bit.. thats what i had to do

is it 2 dumps to the front? try closing the slowdown..

cuz your too fat!

SOUNDS LIKE A LEAKY CYLINDER. MINE WAS DOIN THE SAME SHIT. CHANGED THE SEAL AND THEN IT WAS ALL GOOD

Originally posted by Kandy Drippa@Sep 15 2006, 09:10 AM~6180298
cuz your too fat!

Click to expand...

:roflmao: :roflmao: :roflmao: :roflmao: :roflmao: :roflmao: :roflmao: