Originally posted by ogcaddy+Oct 25 2003, 01:15 PM--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (ogcaddy @ Oct 25 2003, 01:15 PM)</td></tr><tr><td id='QUOTE'><!--QuoteBegin--true rider@Oct 24 2003, 07:16 PM 1 black magic piston pump.8 new batteries and 31/2 ton coils and you be in the 30,s at the minimum
As much hype as I have heard about that pump, if it only hit 30 that would be a joke.
My homie was hitting 41 inches over 2 years ago with an off the shelf Boulevard Steel block pump with a 1" pressure port and 8 batteries in a cutlass.
So hitting 30 would be a joke.[/b][/quote]
no shit that would be a joke.
A car i helped work on in 1999, single pump cutlass, 1/2" prohopper port, 2 deltas on the front(owner wanted both), 72 volts, was hitting almost 40" before the front suspension broke and frame fucked up(the person that did the suspension was a fool )
How to fit 13's on the lincoln
Everyone has there own way and opinion of doing this. I guess its safe to say, that either way you do it, 13s will fit on your car.
A) Swapping out the 95-97 spindles with 90-94 spindles. And they will bolt right up (this is actually the right way to do this...
Lets start a new thread..no more bullshit! I apologize for all the Drama in the other thread...IGNORE THE NEGATIVE POSTS! I need the serious Aircraft Enthusiasts in this thread. THANKS IN ADVANCE!
I will start out with FIREFLY"S set up since we fucked up his thread!
here is some random...
Hey guys i recently changed my whole setup including my boot. I was out rolling on the weekend lifted the rear and blew my rear cyls apart. Both at the same time. Punched the cylinder shaft and piston straight out of the outer tube and past the lock nut. I have not heard of this happening...
I want to get these in the spare tire well on my car , so i spun the blocks , can new holes be drilled and tapped on the bottom , is there any oil passages i have to worry about , and with the mounting holes already there can one block be drilled completely drilled threw and a bolt ran threw and...