LayItLow.com Lowrider Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
2,716 Posts
Discussion Starter #1
i actually did it about a week ago and got the vavles and shit in on monday. i used contitech 2600 bags in the front and made my own brackets and modified the lower arm for the bag so i dont need a cup.i used 1/2" lines and 1/2 valves with 3/8 sirial dump valves and it still slams hard!! gets from lock to lock and lays the crossmember. im running a 210 york at 250 psi and it rolls right up tothat and past that. dont ask how i found out. motherfucker gets up quick and gets about 2-3" under the tires. im probally going to chain the lower arms to take the pressure off the upper ball joint and maybe get it to hop a little higher. i got a titanium plateunder the crossmember and just got home from testing it out.damn that shits bright as hell.

ill get some pics up in the morning. :cool:
 

·
Registered
Joined
·
2,716 Posts
Discussion Starter #3
i got some pics, but photoisland is being gay and i cant upload them. wheres a good site that i can upload pics to? ill try and get some pics of me scraping tonight with the titanium. :cool:
 

·
I Dig Chix Wit Glasses!!!
Joined
·
14,255 Posts
piks, pix pix piks!!!!! :biggrin:
 

·
Registered
Joined
·
10,665 Posts
Originally posted by DusterNut@Aug 28 2003, 12:26 PM
i got some pics, but photoisland is being gay and i cant upload them. wheres a good site that i can upload pics to? ill try and get some pics of me scraping tonight with the titanium. :cool:
upload them into post your rides, you might have to resize them though..
 

·
Registered
Joined
·
2,716 Posts
Discussion Starter #8
got the front end chained up today. it seems alot better and hops a little higher without sounding so damn harsh, now i just need to dual port the front. :cool:
 

·
Registered
Joined
·
2,716 Posts
Discussion Starter #9
i got a nitrogen bottle and regulator today but its empty, im gonna fill it tommorrow so ill let you all know how it does with it and a little more psi. :biggrin: maybe i can get a pic of it in the air.
 

·
Registered
Joined
·
2,716 Posts
Discussion Starter #11
im using a stainless braided line for the york all the way to the tunk and 1/2 plastic for the rest. i was thinking the same thing about the psi ratings, but the guy i got it from uses the same stuff on a hopper with 450 psi, so i gues it can handle it.
 
1 - 11 of 11 Posts
Top