LayItLow.com Lowrider Forums banner
1 - 13 of 13 Posts

· Registered
Joined
·
504 Posts
Call Brent at Pitbull Hydraulics he has some good tips on how to do it especially if you don't have help check my signature below for the number :biggrin: Eric.
 

· Registered
Joined
·
162 Posts
just run solid motor mounts on it, solid body mounts, plate the front frame spring pearch with 1/4" and weld in some gussets on the upper control arm mounts, as long as you hop on level ground and not too crazy you'll be fine
 

· Registered
Joined
·
3,012 Posts
make sure the wrapped frame has holes to access the body mount bolts

it wont take long swapping the actual frames if you have help because you can just pull the body and take a few steps sideways and drop it on the new ones...running all the lines and hooking stuff up will take around a day....realigning the fenders and all will take some time you about a day if youve never done it before, so im guessing it will take you about 2-3 days
 

· Registered
Joined
·
2,454 Posts
Originally posted by timdog57@Sep 16 2005, 08:55 AM~3827539
This makes body swaps and frame offs easy.  :biggrin:
yeah rub it in fukr!!!! :biggrin:
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top