LayItLow.com Lowrider Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
252 Posts
Yeah, 1/2" air line doesn't like to make tight bends. I ran the line on my Ram down the outside of the frame rail and used cable clamps with rubber linings to hold them to the frame. The plastic line sitting against the side of the frame rail isn't going to hurt anything. Where you want to be careful is where it runs past a sharp edge or goes through a hole. Use grommets for holes and shield the line around those sharp edges. You can use stuff like rubber hose to shield the lines. Keep the lines away from the exhaust and moving suspension parts that could rub on it. Just take your time and it'll turn out alright.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top