KEEP BLOWING CYLINDERS

are you blowing the same cylinder or different ones,
make sure your not overlocking when u lift

same cylinders..they are cce chrome..i just want to know what cylnders you would recomend for hopping thats all

Originally posted by Lwrdr83lds@Aug 24 2006, 07:31 AM~6031796
same cylinders..they are cce chrome..i just want to know what cylnders you would recomend for hopping thats all

Click to expand...

prohopper comps.

Originally posted by Lwrdr83lds@Aug 24 2006, 09:31 AM~6031796
same cylinders..they are cce chrome..i just want to know what cylnders you would recomend for hopping thats all

Click to expand...

That is more than likely your problem....

Originally posted by classic kustoms@Aug 24 2006, 09:36 AM~6031821
prohopper comps.

Click to expand...

x2

Ok, I know you have been comeing on here and you have been reading some of these hydraulic posts but I have 1 question.......... Did you miss the numerous topics on how CCE cylinders are junk?
Black Magic or Pro Hopper are the only names you have to know from now on. :biggrin:

well thnaks im gonna order some prohoppers today

actually im a t work somebody have the number to prohopper

818-901-9444

I know regular CCE cylinders suck bad, but the chrome ones dont. Now that doesnt mean they are my first choice in cylinder, but they arent bad like their black ones. We have had them in my girls car for over a year now and not 1 leak. When i ran the black cylinders i would go thru seals 3-4times a year.

I kept blowing seals.. then I heened my cylinders ( exuse my english if its spelled wrong ) and now there working just fine! If the cylinder has a smoth finish on the inside then thats your problem.. heen them and give them another try my 2 cents..

Originally posted by Hoss805@Aug 24 2006, 11:37 AM~6033061
818-901-9444

Click to expand...

ok that number is disconnected

Originally posted by Lwrdr83lds@Aug 24 2006, 12:52 PM~6033510
ok that number is disconnected

Click to expand...

go with black magic,, i have the same ones in my wagon that was in my cutty, and only change the seals once, when i was first learning to hop..been well over a year

i want to get my cylinders honed out.
do you just bring them to a machine shop and ask them to "hone" them out

Originally posted by 925eastbayrider@Aug 25 2006, 04:27 PM~6043160
i want to get my cylinders honed out.
do you just bring them to a machine shop and ask them to "hone" them out

Click to expand...

If they are worn too far out of tolerance honing them will not help.

pro hopper, 818-901-9994

i use there cylenders. 4 yrs straight and not a single leak, running accumes in rear and no troubles

Pro Hopper 818-901-6100, Ask for Mac. He is a really good guy and very willing to help.

Mac @ Pro hopper - Good Peeps