[bdeeks]

Hey. I finished installing a kit I ordered from Airbagit and am having some problems. First off. It seems like the system doesn't have enough power to lift the front of my car. My car is a 1975 Olds 88 with a 455 Rocket engine. Second. The pump doesn't always run until the pressure switch cuts it out at 150psi. It often trips the circuit breaker just at about 130psi. I am a little new to this as the car had hydraulics in it before. Any help is greatly appreciated. Thanks

 

[Bigpokie]

By power I assume you mean pressure? If so, 150# should be fine. Maybe on the low side but should be fine. If the breaker is popping it may be to small gauge of wire powering it or the comps are overheating. Hope this helps.

 

[diabolickustoms]

what size bags do you have in the front? are you running check valves on the pumps?