LayItLow.com Lowrider Forums banner
1 - 20 of 3756 Posts

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #1 ·
http://stores.ebay.com/Impala-Inc

I have also been doing alot of peoples chrome on parts they are sending me. 2 week turnaround or faster all triple plated and pretty fair prices. Can chrome aluminum diecast and steel. I am also looking for ideas and parts you would like to see chromed and offered for sale.
 

·
Registered
Joined
·
3,213 Posts
front suspension and both top and bottom trailing arms and drive shaft for a 79 caprice...lmk.thanks g
 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #5 ·
Originally posted by tru2thagame@Mar 7 2010, 06:01 PM~16822584
front suspension and both top and bottom trailing arms and drive shaft for a 79 caprice...lmk.thanks g

pm me a complete list. front suspension can be alot of parts steering gear box arms spindles coils sway bar etc etc
 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #6 ·
Originally posted by FajitasOnGRill956@Mar 7 2010, 06:15 PM~16822695
g-body mirrors shipped to 78503
dont have any mirrors but if you send me your probably 120.00 for the pair triple plated
 

·
Registered
Joined
·
1,463 Posts
64 impala parts:
inner and outer tie rods and sleeves
rear axle 3rd member
center link
hood hinges
front grill
bumpers
how much chromed and shipped to 32901? and do you need my parts to plate or do you have any of these?
 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #8 ·
Originally posted by J-VO@Mar 8 2010, 04:01 PM~16830604
64 impala parts:
inner and outer tie rods and sleeves
rear axle 3rd member
center link
hood hinges
front grill
bumpers
how much chromed and shipped to 32901? and do you need my parts to plate or do you have any of these?
i have tie rods and sleeves chromed together 3rd member i have on ebay right now. center link i have a manual one for 605 conversions ready to go. hood hinges im working on some next week, bumpers i have some but would need your cores back cuz they r my 64 bumpers. grill i would need yours also.
 

·
Registered
Joined
·
3,467 Posts
TOP AND BOTTOM ARMS FOR G BODY AND A FULL BOXED REAR END GBODY
 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #10 ·
Originally posted by kerncountyhopper@Mar 8 2010, 05:41 PM~16831544
TOP AND BOTTOM ARMS FOR G BODY  AND A FULL BOXED REAR END GBODY
600 to triple plate the rear end. 125 per arm triple plated
 

·
Registered
Joined
·
1,463 Posts
Originally posted by Mr Impala@Mar 8 2010, 07:09 PM~16830692
i have tie rods and sleeves chromed together 3rd member i have on ebay right now. center link i have a manual one for 605 conversions ready to go. hood hinges im working on some next week, bumpers i have some but would need your cores back cuz they r my 64 bumpers. grill i would need yours also.
prices shipped to 32901?
 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #14 ·
:biggrin:
 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #15 ·
die cast is hard to do but this was really pitted and look at it now



 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #16 ·




pot metal isnt easy but heres a couple examples of stuff i did this week. These were pitted pretty bad and even needed to be silver soldered but look at em now
 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #17 ·
trail master rechromed new 58 bracket installed new mirror new bulb etc etc ;)



 

·
Premium Member
Joined
·
64,662 Posts
Discussion Starter · #18 ·
:biggrin:
 
1 - 20 of 3756 Posts
Top