[416impala]

There she is. I flipped her on my 2nd bottle. Still more tweaks to come. its my first air hopper i built so i have learned allot... Yes its a gutted vehicle. I do it for fun, not to compete. I dont know of another vehicle thats flipped over on its side in Canada yet. anybody know if im the first?

Thanks.

[email protected]

 

[aleigh-n]

you got more pictures of that set-up in the bed?

 

[1usamotorsports.com]

good to see you guys holden it down up in canada :thumbsup:

 

[416impala]

Thanks man! Im loving your g-body!

http://www.jrdigitalmarketing.com/aac/rob/first2.wmv

quick little video.

Do you know how many guys have rolled cars or trucks on air? I know
1. usa motorsports
2. daddys.
3. aac

anybody else? I know guage was pretty close and also wicked customs with a flat black s10.

 

[Joker808]

if it had a engine i'd be impressed

 

[GameOver]

We have a Mazda truck that we took out for the first time over the weekend and stood it on the front end on 2 hits. It measured 78 inches when hopping at 500 psi. Best part is that our truck RUNS, DRIVES, and is registered for the streets. Ready for the kicker now. We're running the entire setup IN THE TRUCK. No bottles outside.
We've all seen trucks without motors and running gear go good, now lets see them run the setups in the truck and drive them in and out. No more clown cars.

Mad props to you though for building and beating up a hopper. Keep it going in Canada.

We'll post the video up later in the week once it's transfered from the camera to the computer.

 

[streetlevelcreations]

Originally posted by GameOver@Aug 23 2005, 12:14 PM~3676122
We have a Mazda truck that we took out for the first time over the weekend and stood it on the front end on 2 hits. It measured 78 inches when hopping at 500 psi. Best part is that our truck RUNS, DRIVES, and is registered for the streets. Ready for the kicker now. We're running the entire setup IN THE TRUCK. No bottles outside.
We've all seen trucks without motors and running gear go good, now lets see them run the setups in the truck and drive them in and out. No more clown cars.

Mad props to you though for building and beating up a hopper. Keep it going in Canada.

We'll post the video up later in the week once it's transfered from the camera to the computer.

now that is badass!

 

[streetlevelcreations]

here is ours at scrape 2004 WITH A motor and tranny......we drove ours in and hit 48" :biggrin:

 

[streetlevelcreations]

:0

 

[streetlevelcreations]

short video with hopper in it :biggrin:

http://streetlevelcreations.com/slcvideo1.WMV

 

[GameOver]

We posted a responce in another post, but here it is in this one as well.


Here's a picture from the first time we took our hopper out. It's a complete driver, fully registered and street legal that has the ENTIRE SETUP IN THE BED, nothing outside the truck. Hit deep into the 70 mark, and the front bumper stopped it from going higher.

<a href=\'http://www.thegamesover.com/laylow/part3.wmv\' target=\'_blank\'>Don't believe it, then watch the entire clip here</a>

 

[GameOver]

That's killer. Bagin and Draggin. We're always down to see people hittin it on bags. Nothing better then some serious air on air.... =)

SIC

Originally posted by streetlevelcreations@Aug 23 2005, 04:11 PM~3677696
short video with hopper in it :biggrin:

http://streetlevelcreations.com/slcvideo1.WMV

 

[streetlevelcreations]

NOW THAT F'ING VID WAS BADASS!!!!!!

what valves are you using???


truck moves really smooth

 

[GameOver]

Comes down to having a good switch man to keep the truck hitting and swinging good. I can make it do whatever I want with the flick of a switch. Since it was our first time out with the truck, I wanted to take it easy and not beat it up too bad. If the regualtor han't broke I was about to dance it, and do some serious 500 psi pancakes. Guess I'll have get it back together and do that one day soon and post it on here.

Thanks for the compliment


SIC

 

[streetlevelcreations]

I just watched it again.......WHAT TIRE PRESSURE YOU RUNNING TO GET ALL THAT AFTER BOUNCE????



NICE JOB

 

[IMPALAMAN1]

big pimpin SIC! when can i go for a ride! ;-)

 

[EAZY_510]

Originally posted by GameOver@Aug 23 2005, 04:26 PM~3677797
Comes down to having a good switch man to keep the truck hitting and swinging good. I can make it do whatever I want with the flick of a switch. Since it was our first time out with the truck, I wanted to take it easy and not beat it up too bad. If the regualtor han't broke I was about to dance it, and do some serious 500 psi pancakes. Guess I'll have get it back together and do that one day soon and post it on here.

Thanks for the compliment
SIC

WHATS UP DOG ITS ME SO WHOS THE GOOD SWITCH MAN .....LOL YOU THAT SHIT IS BAD ASS I HEARD YOUR NOT @ THE SHOP NO MORE ? IM STOPING BY NEXT WEEK FOR A CHECK UP I THINK THAT MY SHOKS ARE BLOWN IN THE REAR THE ONES THAT CAME WITH THE KIT AND I MIGHT HAVE A HOLE OR A BAD VALVE IN THE FRONT DONT KNOW. TALK TO YOU LATER

IZ

 

[GameOver]

New shop, same switch skills as before. Go by and see your boy Tricky Nick at the shop. Wanna roll your lifted ride over for some bumper on bumper tandem swings... hahahahhaha


SIC

 

[EAZY_510]

HELL NAWW as for the truck MY EVERY DAY DRIVER i think i need to hook up a botle for more play time .............shit i hit on any body but it sucks when i run out off air fuk it ...........im ALLWAYZDOWNTOCLOWN



i all ready talked to nick ill be stoping by next week

 

[INKA]

put on you set belts it going to be a bumpy ride...