Joined
·
437 Posts
wich one should i buy for the back and what for the fron i have a 1984 cadillac coup deville and it is a 2 pump setup
pro hopper cylender
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Aircraft Hydraulics, Pictures and Info!
HydraulicsLets start a new thread..no more bullshit! I apologize for all the Drama in the other thread...IGNORE THE NEGATIVE POSTS! I need the serious Aircraft Enthusiasts in this thread. THANKS IN ADVANCE! I will start out with FIREFLY"S set up since we fucked up his thread! here is some random...- 8K
- 586K
-
TOPFAN · updated
-
Cylinder shaft blew out
HydraulicsHey guys i recently changed my whole setup including my boot. I was out rolling on the weekend lifted the rear and blew my rear cyls apart. Both at the same time. Punched the cylinder shaft and piston straight out of the outer tube and past the lock nut. I have not heard of this happening...- 0
- 68
-
Need help on mounting pumps as close as possible
HydraulicsI want to get these in the spare tire well on my car , so i spun the blocks , can new holes be drilled and tapped on the bottom , is there any oil passages i have to worry about , and with the mounting holes already there can one block be drilled completely drilled threw and a bolt ran threw and...- 1
- 64
-
~Mike Ishiki~Formerly from Funkadelic~
HydraulicsWell, What can I say. Mike's work speaks for itself. But I would like to start this thread to show off some of his past and present work. I would also like for folks to share some of their pictures of set-ups that mike has build or has touched. One thing is for certain, his skills are...- 1K
- 131K
-
baghdady · updated
Join now to ask and comment!