reccomend a setup on a 2002 escalade
1 - 2 of 2 Posts
Joined
·
1,291 Posts
BASICLY MAKE YOUR OWN KIT I MAKE MY OWN FOR ANY 4X4 OR 2X4 I USE HEAVY DUTY BAGS AND VALVES DONT FORGET THE COMP. FITTINGS AND YOU NEED AT LEAST 200PSI TO LIFTED NICE 
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Switch Extensions
Air SuspensionsI've been fiddling around with my new switches and switch extensions and: How the hell do you keep the switch extension in the right place? You can't do it up too close to the switch mounting because it will foul against it, and also, due to the shape of the switch toggle (narrower towards the...- 39
- 5K
-
M-827 · updated
-
1964 And Earlier Impala Air Suspension Guide!
Air SuspensionsFirst off, lets consider this a rough draft! I want this thread to become the go to source that the other X-Frame thread should have been. The overall idea was great, but there are 7 pages so far of many unanswered ?'s, and unorganized answers littered throughout the thread. The goal here is to...- 357
- 180K
-
NFA Fabrication · updated
-
Viair compressors leak by
Air SuspensionsI have a dual 444c setup and since install ive had issues with tank leaking air. I replaced the existing check valves and still the same. Didn't know there was a torque value to them and thought I messed them up. Sooo replaced them again, set them to proper torque specs and still the same. Took...- 2
- 177
-
djquick · updated
-
Air suspension plumbing and wiring
Air SuspensionsTrying to figure out how to wire the whole system and how the plumbing is supposed to go- 3
- 934
-
Hoppos Bag Cups 63 Caddy
Air SuspensionsWhat's up everyone! I'm gathering parts to bag my 63 caddy, and was curious to see if those who have used the Hoppos bag cups have any thoughts on them. Thanks in advance!- 0
- 188
Join now to ask and comment!