LayItLow.com Lowrider Forums banner

1 - 20 of 39 Posts

·
Registered
Joined
·
8,029 Posts
Discussion Starter #1
OK, i am gonna throw this up here, my borther in law does these on the side and i told him i was gonna put these on here for him...he can reinforce your lower a-arms, and mold them, he can extend reinforce and mold your uppers as well. he is doing these for $200 a set with a core, you pay the shipping to get them back, i dont have any pics yet but he has some that i need to go and pick up and i will be posting picks very soon. i just wanted to see if there would even be any interest in this. the guy does awesome work and is quick. he will get these done and back in the mail to you within a couple days. so what do you guys think. he can do trialing arms and shit like that too, just gotta get a set for him and get a price. let me know. I have been on here for a long time and have not fucked anyone over. I am vouching for him and he does great work. the only pic i have at the moment are of the ones he did on my regal.....these were extended 1.5 inches and fully wrapped with 3/8" and molded....

just talked to him and he said to tell everyone that if you send both sets at the same time....uppers and lowers he will knock off $25 off the total...so your looking at $375 for uppers extended wrapped and molded and lowers wrapped and molded for a total of $375 plus shipping and cores.....can't beat that :cool: :cool: :cool:



 

·
Registered
Joined
·
2,433 Posts
:thumbsup:

Wish I knew about this 6 months ago!
 

·
Registered
Joined
·
8,029 Posts
Discussion Starter #3
ttt
 

·
Registered
Joined
·
17,780 Posts
so it's $200 and core uppers lowers ect for wrapped and molded set? Plus shipping your cores and then shipping on them back. So probably $300 total dang that's a good price right there. How about just wrapped, same price? Lmk I might need some done for a g body it is winter time now
 

·
Registered
Joined
·
434 Posts
so 200 and send you my upper and lower arms and you can have them extended 1'' and wrapped and molded? if so ill be needing a number to contact...
 

·
Registered
Joined
·
8,029 Posts
Discussion Starter #6
Originally posted by BigNasty85Regal+Nov 19 2008, 02:28 AM~12198467-->
so it's $200 and core uppers lowers ect for wrapped and molded set?  Plus shipping your cores and then shipping on them back. So probably $300 total dang that's a good price right there. How about just wrapped, same price?  Lmk I might need some done for a g body it is winter time now
[/b]
well $200 per set...so $200 for the uppers, $200 for the lowers plus cores.....if you send the money with the arms, they will be done before 1 week and be back on the road to you :cool:


<!--QuoteBegin-showlow
@Nov 19 2008, 03:26 AM~12198736
so 200 and send you my upper and lower arms and you can have them extended 1'' and wrapped and molded? if so ill be needing a number to contact...
$200 per set....meaning $200 for uppers and $200 for lowers...and yes they will be extended how you want and reinforced and molded....they will damn near ready to dip when you get them back....let me know guy does awesome work :cool:

just talked to him and he said to tell everyone that if you send both sets at the same time....uppers and lowers he will knock off $25 off the total...so your looking at $375 for uppers extended wrapped and molded and lowers wrapped and molded for a total of $375 plus shipping and cores.....can't beat that :cool: :cool: :cool:
 

·
Registered
Joined
·
8,029 Posts
Discussion Starter #7
just talked to him and he said to tell everyone that if you send both sets at the same time....uppers and lowers he will knock off $25 off the total...so your looking at $375 for uppers extended wrapped and molded and lowers wrapped and molded for a total of $375 plus shipping and cores.....can't beat that :cool: :cool: :cool:
[/quote]
:cool:
 

·
Registered
Joined
·
8,029 Posts
Discussion Starter #8
ttt
 

·
Registered
Joined
·
8,029 Posts
Discussion Starter #9
lets do this
 

·
Registered
Joined
·
9,528 Posts
:0 post more pics
 

·
Registered
Joined
·
5,976 Posts
Originally posted by ihopthode@Nov 23 2008, 07:36 PM~12237642
so two uppers and two lowers plus shipping, what do u mean core
if you dont send him arms then he has to supply them, this is what people call a core charge so they dont lose money, if you ship him your arms then he takes the core charge off and just charges you for the labor...
 

·
Registered
Joined
·
8,029 Posts
Discussion Starter #15
sorry everyone, i was at the magnificos show in houston all weekend.....the core maens that you have to send yours. if we have to go hunt some down for you then it will cost more. i will be posting some pics real soon, just havent gotten them from him yet....
 

·
Registered
Joined
·
8,029 Posts
Discussion Starter #17
Originally posted by showlow@Dec 1 2008, 03:11 AM~12299979
lets see sum more pics! im about ready to take my arms off and looking for the best quality for the money!  :biggrin:
ok, heres a set he just finished up, took him one day to do these....guy is quick and does good work, this is a set of g body lowers...

little polishing and they are ready for chrome.... :biggrin:











 

·
Registered
Joined
·
432 Posts
Originally posted by FunkytownRoller@Nov 18 2008, 08:37 PM~12196256
OK, i am gonna throw this up here, my borther in law does these on the side and i told him i was gonna put these on here for him...he can reinforce your lower a-arms, and mold them, he can extend reinforce and mold your uppers as well.  he is doing these for $200 a set with a core, you pay the shipping to get them back, i dont have any pics yet but he has some that i need to go and pick up and i will be posting picks very soon.  i just wanted to see if there would even be any interest in this.  the guy does awesome work and is quick.  he will get these done and back in the mail to you within a couple days.  so what do you guys think.  he can do trialing arms and shit like that too, just gotta get a set for him and get a price.  let me know.  I have been on here for a long time and have not fucked anyone over.  I am vouching for him and he does great work. the only pic i have at the moment are of the ones he did on my regal.....these were extended 1.5 inches and fully wrapped with 3/8" and molded....

just talked to him and he said to tell everyone that if you send both sets at the same time....uppers and lowers he will knock off $25 off the total...so your looking at $375 for uppers extended wrapped and molded and lowers wrapped and molded for a total of $375 plus shipping and cores.....can't beat that :cool:  :cool:  :cool:




SORRY FOR GETTING OUT OF SUBJECT BUT COULDN'T HELP NOTICING THAT EXPENSIVE NICE ROLLING CHASSIS IS NOT STRAPPED :( WHY,WHY,WHY :( THAT SHOULD OF BEEN THE FIRST THING TO GET BEEFED UP
 

·
Registered
Joined
·
8,029 Posts
Discussion Starter #19
the stress points were done, it is fully molded too... ;) ;) ;) ;)
 

·
Registered
Joined
·
432 Posts
Originally posted by FunkytownRoller@Dec 6 2008, 05:04 PM~12354728
the stress points were done, it is fully molded too... ;)  ;)  ;)  ;)
MY BAD SHOULD OF GONE THE XTRA MILE AND STRAP IT TO NICE TO RISK IT,,,PS CLEAN WORK :thumbsup:
 
1 - 20 of 39 Posts
Top