LayItLow.com Lowrider Forums banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
5,323 Posts
if it has one of the "gold" style motors on it, there should be 2 phillips head screws on the end cap, you have to remove the end cap to get to the bolts that hold the motor on...

if you have already removed the mounting bolts for the motor, just wiggle the motor back and forth a bit and it should loosen up and come off.
 

·
Registered
Joined
·
6,207 Posts
Originally posted by vegashopper@Dec 5 2003, 03:36 PM
if it has one of the "gold" style motors on it, there should be 2 phillips head screws on the end cap, you have to remove the end cap to get to the bolts that hold the motor on...

if you have already removed the mounting bolts for the motor, just wiggle the motor back and forth a bit and it should loosen up and come off.
yeah two bolts! ;)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top