LayItLow.com Lowrider Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,302 Posts
One helpful hint when removing brake lines and hoses is to unscrew the brake fluid reservoir cap and put a plastic bag (or similar) over the opening and screw the cap back on. This blocks off the breather hole and will stop brake fluid running everywhere when you undo the line.

Make sure you bleed the brakes in the correct order once you have everything back together. You'll have to look this up in the workshop manual for your car because it does vary depending on the braking system.

I like the look of the exhaust system on the car in the picture above! Just the type I really like :biggrin: !
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top