reverse cylinders
1 - 4 of 4 Posts
Joined
·
8,970 Posts
THERE USED FOR FWD CARS, THEY GO IN UPSIDE DOWN FOR CLEARENCE REASONS, THE CYLINDER IS HOLLOW SO THE FLUID COMES THROUGH THE IT.
Joined
·
6,749 Posts
or rear wheel drive sports cars with struts like mine was
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
1964 impala caprice spindle/A-arm length
HydraulicsI'm getting to the point in the front suspension that i need to do the A-arms (lengthen and plate) I just got all the caprice spindle components to do the disc brake swap after doin a little reading I see the caprice spindles being bigger seem to already cause the tires to camber out so some say...- 18
- 2K
-
switches4bitchz · updated
-
G body wont go up
Hydraulicshello lowrider Community I need some help I just bought a 80 Cutlass with 10 switches two pumps 10 batteries first thing I did was change the batteries I got it to go up in the front...when I hit the switch on the back the motors and 2 solenoids start smoking. Also it burnt up the back switch in...- 1
- 85
-
Demand21 · updated
-
Gate pumps
HydraulicsWhat's the pros and cons of useing gate pumps. There s few caris around me and there doin fine. Seems good- 3
- 123
-
Grinding noise when going up and down
HydraulicsOK guys... Back story... When I tap the switch to go up, it would go up an inch and would slam back down on its own. I took the pump apart and a piece from the gear was floating around so I figured is was the gear. NOW>>> I stopped by Kool-Aid's shop and I picked up a new gear and while I was...- 4
- 308
-
Johnny562 · updated
-
Battery cable
HydraulicsWhat cuases battery terminal to melt, running only 4 batteries for both pumps- 2
- 289
-
Layo · updated
Join now to ask and comment!