LayItLow.com Lowrider Forums banner
1 - 5 of 5 Posts

·
Phoenix Chapter President
Joined
·
6,456 Posts
Originally posted by 85regalrider@Feb 17 2010, 02:59 PM~16641909
how much should i cut them it going on a 85 buick regal ...not hopping just lay and pay help  :biggrin:
depends what rated ton they are,cuz the measured space between a 4 ton and a 1 ton are very different. thats if were talking about laying on the ground v.s. sitting a few inches off of it......take into consideration if for some reason you blow/pinch a hose you still want to be able to drive home with no problem... ;)
 

·
Registered
Joined
·
1,968 Posts
I'd cur the front springs in half . use them on the front and back.

My s-10 rode good like that. It's kinda a similar setup.

p/s I ran shocks on all 4

But without them It still rode decent
 

·
Registered
Joined
·
181 Posts
Discussion Starter · #5 ·
Originally posted by DanielDucati@Feb 17 2010, 03:58 PM~16642395
depends what rated ton they are,cuz the measured space between a 4 ton and a 1 ton are very different. thats if were talking about laying on the ground v.s. sitting a few inches off of it......take into consideration if for some reason you blow/pinch a hose you still want to be able to drive home with no problem... ;)

just to sit low and if i do blow a hose i can drive home..how many turn should there be ... on the front and back im going to be getting 3 ton all the way around..thanks for the help
 
1 - 5 of 5 Posts
Top