LayItLow.com Lowrider Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter #1
I'm juicin a 64 impala with a street kit and i want to do three wheels and some hoppin, not big hoppin as its only a street kit. What size springs do you think I should use.
 

·
Registered
Joined
·
369 Posts
at least 2 tons all the way around... but dont cut the front springs any shorter than 7 turns if you wanna hop.. if you wanna 3 wheel as well i would cut the back springs pretty short so the car will lean hard... you need at least 12 inch cylinders in the back.
 

·
Registered
Joined
·
4,710 Posts
Originally posted by nissanminitrucker@Oct 2 2003, 10:18 AM
at least 2 tons all the way around... but dont cut the front springs any shorter than 7 turns if you wanna hop.. if you wanna 3 wheel as well i would cut the back springs pretty short so the car will lean hard... you need at least 12 inch cylinders in the back.
I agree....Me personally would do at leats 2 tons all the way around up to 3 1/2's in the front & 3's in the rear.
 
1 - 4 of 4 Posts
Top