[foey]

Put the tires on finally. They say 32 p.s.i. on em and stuff, and I did it too. But the problem is that the tires keeps popping out. It looks as if they are going to come off the rim. Any1 knoe how to fix this problem?

 

[bratboy1488]

take the air out so that the bubble aint there ne more then re fill it but not all the way to the full psi. it should work.it usually works for me

 

[foey]

coo, thanx :thumbsup:

 

[__Bosha__]

What do u mean popping out? it could be that the tire has some sort of lump on the side...



Last edited by __Bosha__ at Aug 31 2003, 12:27 PM

 

[foey]

it looks lopped sided from the left side near the rim (frnt rim). And I can see a bit of the tire coming out.



Last edited by foey at Aug 31 2003, 12:31 PM

 

[bratboy1488]

its just a bubble just try what i said and see if it works

 

[__Bosha__]

If its a bubble u might need a new tire but try what Bratboy said if it dont u need a new tire

 

[hydryan]

happened to me, deflate the tire, then pump it up while holding the bead in place (lip of tire) it should work, it fixed mine

 

[Lownslow302]

if the tire pops out it might be the wrong size. for bubbles i hammer(not a real hammer a tire hammer) the tires after filling them up.

 

[64_impalas]

Originally posted by __Bosha__@Aug 31 2003, 11:27 AM
What do u mean popping out? it could be that the tire has some sort of lump on the side...

like a egg , ya gootta deflate the tyre and slide it around with a lil bit of air in it , and steaighin it out with a lil bit of air in the tube , keep playin round with it , if it dont work , deflate it and try and again