LayItLow.com Lowrider Forums banner
1 - 20 of 43 Posts

·
Registered
Joined
·
4,042 Posts
Discussion Starter · #1 ·
I'm curious what everyone uses, I used to just use torch goggle when I was younger, but in my old age, I've been using my auto-darken helmet turned off.
 

·
Registered
Joined
·
3,265 Posts
shade 5. you can get goggles or most welding lens adjust the shade tinting
 

·
SINGLE PUMP NO WEIGHT
Joined
·
19,176 Posts
I look out of the corner of my eye! :cheesy:
 

·
Registered
Joined
·
9,793 Posts
i got some plasma goggles from the welding store not sure what shade they are
 

·
Registered
Joined
·
19,361 Posts
Originally posted by big pimpin@Mar 3 2010, 01:13 PM~16784726
I look out of the corner of my eye!  :cheesy:
x2 I kinda hold my hand over the gun too.
 

·
over it
Joined
·
6,640 Posts
My welding helmet has 3 setting. Grinding, torching, welding, I use the grinding setting and it works perfect. I can still see my lay out lines but don't get flashed too much.
 

·
Registered
Joined
·
3,099 Posts
Originally posted by littlerascle59@Mar 3 2010, 04:20 PM~16785182
x2 I kinda hold my hand over the gun too.
man you guys must have some steady fucking hands and shit. i can barely get my lines straight with my face on the torch holding that shit in 2 hands with my eyes wide open.
 

·
SINGLE PUMP NO WEIGHT
Joined
·
19,176 Posts
I was just kidding ..... :biggrin:
 

·
Registered
Joined
·
8,414 Posts
clear face shield and a retired pair of locs if needed.

sometimes I just use the torch to block the brightness on small cuts
 

·
Registered
Joined
·
4,241 Posts
Originally posted by AndrewH@Mar 3 2010, 01:52 PM~16785883
clear face shield and a retired pair of locs if needed.

sometimes I just use the torch to block the brightness on small cuts
ha ha that's what i use for the torch fuck them goggles and shit :cool:
 

·
Registered
Joined
·
11,597 Posts
I have a bunch of goggles and some are pretty comfortable so I use them. Concentrated UV and your eyes = dumb ass.
 

·
Registered
Joined
·
4,042 Posts
Discussion Starter · #18 ·
Originally posted by OUTHOPU@Mar 3 2010, 03:23 PM~16785207
My welding helmet has 3 setting. Grinding, torching, welding, I use the grinding setting and it works perfect. I can still see my lay out lines but don't get flashed too much.
What kind of helmet you have? I need to get one that has a grind and torch setting
 

·
Registered
Joined
·
6,488 Posts
What kind of dryer do u guys use on ur air lines ?
 

·
over it
Joined
·
6,640 Posts
Originally posted by chaddyb@Mar 3 2010, 09:25 PM~16788408
What kind of helmet you have? I need to get one that has a grind and torch setting
I forget the brand. I'll try to write it down the next time I go out to work.
 
1 - 20 of 43 Posts
Top