[REALTALK]

sup homie's just need some advice on what size pumpheads I will need to hit back bumper. I have an 84 cutty with a 350 sbc. I am running 3 gates, 2 to the front and 1 to the ass. I I got 8 in strokes in front and 12's to the rear. I am running 8 batts with italian dumps. extended a- arms and reinforcement on the frame. I was told to get #11's and others say #9's. What's the difference. What size springs should I get. Any help would be greatly appreciated.

 

[REALTALK]

ttt

 

[MUFASA]

I would go with #9's but try to put 10 batts, five each front pump.......you'll just have to play with coils...............anything from 3 tons to 4.5.......all cars don't act the same....trial and error.........

 

[NastyRedz]

what size hoses are you runnin, it makes a big differance. hoses, voltage,pumphead,cylinder diameter

 

[REALTALK]

cool bro. I have also hear people say go with 11's and 13's for pumpheads, I was like wtf 13's.

 

[REALTALK]

#6 hoses, 8 in strokes in front.

 

[MUFASA]

Double pump should run 2 #8's

 

[chato83]

Originally posted by bigpimpin25@Sep 11 2005, 12:27 PM~3793219
sup homie's just need some advice on what size pumpheads I will need to hit back bumper. I have an 84 cutty with a 350 sbc.  I am running 3 gates, 2 to the front and 1 to the ass. I I got 8 in strokes in front and 12's to the rear. I am running 8 batts with italian dumps. extended a- arms and reinforcement on the frame. I was told to get #11's and others say #9's. What's the difference. What size springs should I get. Any help would be greatly appreciated.

i would run 2 #11 with all 8 batteries hooked up so it will be 96 volts it wont last very long but you will definatley catch some air how much are your a arms extended and i would run 4 1/2 ton springs :biggrin: :biggrin:

 

[REALTALK]

1 in. extended a-arms.

 

[BigNasty85Regal]

#9 marz pump heads, or #11s.............................#8 hoses to the front, one from each pump...................with 3.5 to 4 ton full stack coils, and run both pumps off 96 volts volts shared bank

 

[REALTALK]

cool bro. Will that get me back bumper on my cutty

 

[chato83]

Originally posted by bigpimpin25@Sep 11 2005, 03:47 PM~3794129
cool bro. Will that get me back bumper on my cutty

it should if you are good on the switch and your batts are charged

 

[REALTALK]

:0 :cheesy:

 

[BigNasty85Regal]

Originally posted by chato83@Sep 11 2005, 08:40 PM~3795622
it should if you are good on the switch and your batts are charged

right :biggrin:

 

[BigNasty85Regal]

3/8th in rear of frame and 1/4 or 3/16 in front for reinforcements

 

[REALTALK]

oh o.k.

 

[BigNasty85Regal]

Originally posted by bigpimpin25@Sep 12 2005, 04:11 PM~3800370
oh o.k.

reinforce your a-arms too box them in.................swanging, or single pump 12 batteries

 

[BlackMagicHydraulics]

Originally posted by bigpimpin25@Sep 11 2005, 03:42 PM~3793786
#6 hoses, 8 in strokes in front.

SINCE YOU HAVE SMALL HOSES I WOULD RECOMEND RUNNIN TO # 7'S .....7'S MAKE THE MOST PRESSURE AND WITH THE 350,THAT WEIGHT WOULD HELP TO CRUSH SOME 4.5 TON COILS...GOOD FOR AROUND 50'' OR SOO
I WOULD RUN AT LEAST 10 BATTS OR EVEN 12..

 

[8FoCutty]

/\ true, since you running small hoses #6/ 3/8", alot less fluid needs to be pushed, id run 6-7 batts to a good motor to get some rpm, torque wont be a prob with #7 gear...

 

[REALTALK]

damn bro somebody has to hook me up with all theses parts EH.