[RedDragun]

i just found a F.B.S.S. air kit on airbagit.com for a 1994+ integra. will it work on my 1991 integra? if not, are there any kits for my car or can i build a kit?

Late

RedDragun

 

[goodmouse]

dont buy an aim kit. they screw you.

 

[purpl7duece]

i've had many aim setups and thay are good. Sometimes they get shippin messed up but that is not too often. there are soo many people that order and a few get messed up and they get a bad rep. But you are gonna want an air rod kit. look on ebay undr "air cylinders" or "air ride" you might get one cheaper there

 

[RedDragun]

so what all do i need? off the top of my head i can think of:
-compressor
-tank
-valves
-hoses
-switch box and switches
-wiring
-acculmulators
-air struts

am i missing anything?TIA

Late

DarksydeDragun

 

[air280]

http://www.airliftcompany.com/easystreet/e...zindexframe.htm

 

[RedDragun]

the only thing i found on airliftcompany.com was for 1994 and up integras. i'm assuming i need to find something that will fit inside a shortened spring? i'm not entirely sure how to air bag a honda....... an s-10 or something like that, i'd have no problem. but i want to be able to lift the car up when i'm driving so i don't crush my bodykit and then set it down so that the body kit is just about on the ground when i park.

late

DarksydeDragun

 

[purpl7duece]

YOU REALLY DON'T NEED THE ACCUMS FOR AIR RODS. IT HELPS A BIT BUT NOTHIN DRAMATIC LIKE HYDRO ACCUMS. HERE IS PRETTY MUCH ALL YOU WILL NEED. 4 CYLINDERS AND BRACKETS 1.00 Heavy Duty Compressor (150psi)
1.00 5 gallon air tank
4.00 1-way smc 3/8 valve
1.00 firestone dual electric gauge
1.00 pressure switch (120psi)
1.00 90-97 honda accord air brackets
20" 1/4 dot air line
60" 3/8 dot air line
1.00 1/4m to 3/8m straight
1.00 1/4npt to 3/8 line straight
6.00 3/8npt to 3/8 line straight
2.00 3/8npt to 3/8 line elbow
2.00 3/8 line to 1/4 line reducer
4.00 3/8 line tee
1.00 3/8 line compressor tee
2.00 3/8npt to 3/8line / 3/8line tee
2.00 3/8npt air muffler
1.00 glass water trap filter