[kandychromegsxr]

I need a LINCOLN VERSAILLES disc brake rearend for my 63 vert. can anyone help?

thanks Andrew
336 218 0766

 

[ghettoblaster]

Just buy a truck 9" rearend and have it shortened. I can give you the part numbers for a cheap disc brake conversion for it. You will have alot less money in it and be stronger. I have less than $120 in my disc brake swap kit. You are looking at way more than that for new rotors for a lincoln.

 

[rag-4]

Originally posted by ghettoblaster@Oct 29 2007, 04:38 AM~9104916
Just buy a truck 9" rearend and have it shortened. I can give you the part numbers for a cheap disc brake conversion for it. You will have alot less money in it and be stronger.  I have less than $120 in my disc brake swap kit.  You are looking at way more than that for new rotors for a lincoln.

What are the part numbers??

 

[64flattop]

Originally posted by cruize1@Oct 29 2007, 06:03 AM~9105034
What are the part numbers??

x2

 

[63 ss rider]

Originally posted by 64flattop@Oct 29 2007, 05:07 AM~9105045
x2   

x3

 

[ghettoblaster]

Not sure of the part numbers right now.

But the calipers are gm metric calipers (S-10) Bought mine for $10 each and Mid eighty's Firebird rear rotors bought mine for like $ 25 dollars. To use ford axles you will have to have the bolt pattern redrilled to match either axles or rotor. Fab up the weld on bracket or I can provide you one.

 

[kandychromegsxr]

X4
I done thought about that but lookin for something fast. Still might do it. if anyone know where some truck rearends are

 

[ghettoblaster]

I can post exact part numbers tommorow

 

[63 ss rider]

Originally posted by ghettoblaster@Oct 29 2007, 07:40 AM~9105553
I can post exact part numbers tommorow

please do i got mine that i want to run disc brakes on

 

[rag-4]

Originally posted by ghettoblaster@Oct 29 2007, 08:40 AM~9105553
I can post exact part numbers tommorow

 

[64flattop]

Originally posted by kandychromegsxr@Oct 29 2007, 08:39 AM~9105549
X4
I done thought about that but lookin for something fast. Still might do it. if anyone know where some truck rearends are

I have few ford 9" 11"drums
before

AFTER :biggrin:

 

[Cali4Lyf]

Originally posted by 64flattop@Oct 29 2007, 09:34 AM~9106185
I have  few ford 9"  11"drums
before

AFTER  :biggrin:

No disrespect intended, but is that rattle can chrome? :0

 

[kandychromegsxr]

yea the chrome dont look so good to me either. but is that the right width for impala? and i would make my own wishbone. and can ya get disc brakes for that rearend?

 

[64flattop]

Originally posted by Cali4Lyf@Oct 29 2007, 11:25 AM~9106525
No disrespect intended, but is that rattle can chrome? :0

homie its not RATTLE CAN CHROME
IT'S POWDERCOATING CHROME

 

[ghettoblaster]

Auto Zone Part Numbers

Rotor 5551
Caliper C160 and C161

 

[Cali4Lyf]

Originally posted by 64flattop@Oct 29 2007, 09:26 PM~9111551
homie its not  RATTLE CAN CHROME
IT'S POWDERCOATING CHROME

Thats cool,

A guy out here did his frame like that. It looked ok under the car where direct light doesn't hit it.

Is that finish supposed to stay shiny for as long as other powder coats? That would be nice.


Peace-

 

[63 ss rider]

Originally posted by ghettoblaster@Oct 30 2007, 03:09 AM~9112496
Auto Zone Part Numbers

Rotor 5551
Caliper C160 and C161

thanks man im gonna go grab them tommorrow

 

[kandychromegsxr]

TTT

 

[kandychromegsxr]

still need one

 

[kandychromegsxr]

TTT