LayItLow.com Lowrider Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
343 Posts
Discussion Starter #1
what is that max psi u can get from a york?
 

·
Face Puncher
Joined
·
25,975 Posts
I've "heard" over 250..

I run at 175 with no problem
 

·
Registered
Joined
·
91 Posts
I've had up to 350 but thats pushin it, yorks heat up a lot when they are running for too long and under more strain from the higher pressure.
 

·
Registered
Joined
·
343 Posts
Discussion Starter #4
175 psi is plenty of air for me, what cfm is it or does anybody know, the compressor is a york #8 i belive
 

·
Face Puncher
Joined
·
25,975 Posts
no such animal..

its either a 207, 209, or 210..

the last 2 digits are the York's CID/REV

at an assumed 800rpm idle, with a 1:1 drive ratio...
207=3.24 CFM
209=4.16CFM
210=4.62CFM
 

·
Registered
Joined
·
2,716 Posts
i run mine to 300 everyday, ive had it up to about 340-350 on accident though. kinda scarry looking at the pressure gauge and seeing it that high :0
 

·
Face Puncher
Joined
·
25,975 Posts
I bet... afraid to even hit the switch...

what PSI is your tank rated at? :0
 

·
Registered
Joined
·
2,716 Posts
not sure what the tanks rated at. i know they use the same exact ones in a hopper at like 600 psi, so i should be safe. i had the pressure up to 420 with a nitrogen bottle, but the 3/8 dumps dont let it down quick enough.
 

·
Registered
Joined
·
343 Posts
Discussion Starter #10
lol doesnt nayone run regulators to prevent from blowing their bags? oh and two of the yorks i have are 210's and the other one is a 207
 
1 - 11 of 11 Posts
Top