http://viewmorepics.myspace.com/index.cfm?...&albumId=401900

 

I used to sell reds sruts. Back inthe day people didn't want to Pay. we built them as needed

 

that link you sent me drgn4dr ?? how are the cylinders held into the holder? is it just the sheer weight of the car?

 

yes

 

Thats a tight fit then?? dosent that seem a little dangerous?? how tight is the cylinder on that holder?

 

Originally posted by drgn4dr@Jan 25 2010, 06:15 PM~16408741
http://viewmorepics.myspace.com/index.cfm?...&albumId=401900

This!
I have an ion I'm putting hydros in and this is how I built mine
Heres mine.

 

Originally posted by artsar@Jan 25 2010, 08:18 PM~16410213
This!
I have an ion I'm putting hydros in and this is how I built mine
Heres mine.

NICE :thumbsup: :thumbsup: hydroholics stuff

 

Originally posted by WelshBoyo@Jan 25 2010, 06:25 PM~16408843
that link you sent me drgn4dr ?? how are the cylinders held into the holder? is it just the sheer weight of the car?

I built that setup in the Impala. The cylinder is 1.5" O.D. The tuning sleeve I used is 1.75" X .120" wall. That means that there is only .005" clearance. That is tight enough that I had to press the cylinder into the sleeve. There is absolutely no movement in them. I actually did that car before hydroholics was around.

 

Originally posted by WelshBoyo@Jan 25 2010, 06:39 PM~16409011
Thats a tight fit then?? dosent that seem a little dangerous?? how tight is the cylinder on that holder?

What seems dangerous about it? There is nothing dangerous about how it is done. It is basically the same way I do them now with the hydroholics cylinders and sleeves. (basically the same way that artsar did his). There are more pics on the myspace page for the installs.
www.myspace.com/hydroholicsinstalls

 

on mine I used 3 turns of 3/4" springs. im redoing them to add more spring. I have accumulators, but the ride is still too bumpy.